Z6CNT18-10
2017-06-15 11:09:38 Origin: Remark:0 Click:
NF A35-578 Heat resistant steel Z6CNT18-10 Round bar, Plate, ESR melting, Z6CNT18 Hot blooming, UT, Hot forging, Hot rolling, Heat treatment
TECHNICAL SPECIFICATION - Grade NF Z6CNT18-10
OFFICIAL TEST CERTIFICATE: issued by TUV - SGS - BV
MATERIAL CATEGORY: Heat resistant Steel
Technical standards: NF A35-578 - 1991
CHEMICAL COMPOSITION (mass weight - %)
Carbon, C (%): ≤ 0.06
Silicon, Si (%): ≤ 0.75
Manganese, Mn (%): ≤ 2.00
Phosphorus, P (%)≤: 0.040
Sulfur, S (%)≤: 0.015
Chromium, Cr (%): 17.0 ~ 19.0
Nickel, Ni (%): 9.00 ~ 11.0
Molybdenum, Mo (%): -
Molybdenum, Mo (%): -
Titanium, Ti (%): 5 X (C+N) ~ 0.70
MECHANICAL PROPERTIES UNDER ROOM TEMP.
Tensile strength,σb/≥ MPa: 515
Yield strength, σ0.2/≥ MPa: 205
Elongation, δ ≥(%): 40.0
Yield strength, σ0.2/≥ MPa: 205
Elongation, δ ≥(%): 40.0
hardness / HBW: 217 Max.
PRODUCT DESCRIPTION
The alloy is usually produced by AOD / VOD / EAF followed by electroslag refining (ESR) / VAR if necessary for special purpose. Bars and, where applicable, forgings are subjected to ultrasonic examination based on the different levels according to the buyers' requirements.
Bars are usually supplied black/bright in the annealed condition.
Final heat treatment - solution treatment.
PRODUCT PROFILE & DIMENSIONS
The alloy is usually produced by AOD / VOD / EAF followed by electroslag refining (ESR) / VAR if necessary for special purpose. Bars and, where applicable, forgings are subjected to ultrasonic examination based on the different levels according to the buyers' requirements.
Bars are usually supplied black/bright in the annealed condition.
Final heat treatment - solution treatment.
PRODUCT PROFILE & DIMENSIONS
Round bar (diameter): 5.50 to 600mm
Square bar / flat bar: T10 to 500mm X W3 ~ 1200mm
Length: Fixed length or random length or based on the customer's special requirement.
Heavy/middle plate via hot rolled: T3 - 200mm X W1000- 2500mm X L1000-12000mm
Sheet steel via cold rolled: T0.5 - 3mm X W600- 1000mm X L1000 - 2000mm
Steel strip via cold rolled: T0.1 - 3mm X W5 - 600mm X L (or in coil form).
Square bar / flat bar: T10 to 500mm X W3 ~ 1200mm
Length: Fixed length or random length or based on the customer's special requirement.
Heavy/middle plate via hot rolled: T3 - 200mm X W1000- 2500mm X L1000-12000mm
Sheet steel via cold rolled: T0.5 - 3mm X W600- 1000mm X L1000 - 2000mm
Steel strip via cold rolled: T0.1 - 3mm X W5 - 600mm X L (or in coil form).
TECHNICAL SALES ASSISTANCE
If you meet further on any technical enquiry, please you can do EMAIL our qualified production engineers, Email: sales@ccsteels.com
If you meet further on any technical enquiry, please you can do EMAIL our qualified production engineers, Email: sales@ccsteels.com
Hot search:Z6CNT18-10
Previous page:Aquamet 22
Last page:Arnavar