X8CrTi18
2026-02-22 15:40:00 Origin： Remark：0 Click：
Material specifications A35-570 -1996 stainless steel X8CrTi18 peeled round bar, flat bar, plate, sheet, steelmaking, ESR remelted, hot bloomed, forged, rolled, heat treated
TECHNICAL DATA SHEET - X8CrTi18
Official Tesr Certificate: issued by TUV - SGS - BV
Material category: 18Cr - 0.5ti base stainless steel
Technical standards: NF FD A35-570 - 96
Typical chemical compositions (mass fraction %)
Carbon, C (％): ≤ 0.09
Silicon, Si (％): ≤ 1.40
Manganese, Mn (％): ≤ 1.40
Phosphorus, P (％): ≤ 0.030
Sulfur, S (％): ≤ 0.020
Chromium, Cr (％): 16.7 ~ 18.3
Phosphorus, P (％): ≤ 0.030
Sulfur, S (％): ≤ 0.020
Chromium, Cr (％): 16.7 ~ 18.3
Molybdenum, Mo (％): -
Nickel, Ni (%): -
Titanium, Ti (%): 0.35 ~ 0.65
Nitrogon, N (%): ≤ 0.06
MECHANICAL PROPERTIES
Tensile strength,σb/≥ MPa: 515
Yield strength, σ0.2/≥ MPa: 310
Elongation, δ ≥(％): 20.0
Yield strength, σ0.2/≥ MPa: 310
Elongation, δ ≥(％): 20.0
Reduction of area, (%): 55.0
Annealed hardness, HB ≤: -
PRODUCT DESCRIPTION
The alloy is usually produced by AOD / EF / EAF followed by electroslag refining (ESR) / VAR if necessary for special purpose. Bars and, where applicable, forgings are subjected to ultrasonic examination based on the different levels according to the buyers' requirements.
Bars are usually supplied bright in the annealed condition.
Final heat treatment - quenched and tempered thermal treatment
PROFILE & DIMENSIONS
The alloy is usually produced by AOD / EF / EAF followed by electroslag refining (ESR) / VAR if necessary for special purpose. Bars and, where applicable, forgings are subjected to ultrasonic examination based on the different levels according to the buyers' requirements.
Bars are usually supplied bright in the annealed condition.
Final heat treatment - quenched and tempered thermal treatment
PROFILE & DIMENSIONS
Round bar & Disc (diameter): 6.0 to 800 mm
Square bar / flat bar: T3.0 to 500mm X W3.0 ~ 1200mm
Length: random length or based on the customer's special requirement.
Sheet / plate via hot / cold rolled: T0.5 - 200 X W20 ~ 1500 X L1000 ~ 12000 mm
Square bar / flat bar: T3.0 to 500mm X W3.0 ~ 1200mm
Length: random length or based on the customer's special requirement.
Sheet / plate via hot / cold rolled: T0.5 - 200 X W20 ~ 1500 X L1000 ~ 12000 mm
TECHNICAL SALES ASSISTANCE
If you meet further on any technical enquiry, you can do EMAIL our qualified production engineers, E-mail sales@ccsteels.com
If you meet further on any technical enquiry, you can do EMAIL our qualified production engineers, E-mail sales@ccsteels.com
Hot search：X8CrTi18
Previous page：X8Cr24
Last page：AMS 6422E / K11940
Total list
Monthly rank
- 21ASTM A565 type 616HT
- 18X8CrMnN20-10
- 142Cr11NiMoNbVN
- 13AM-350
- 13X66Cr13
- 13ASTM A693 Gr. XM-16
- 13SUH310
- 13S42035
- 132Cr20Mn9Ni2Si2N
- 12STS321