409Cb
2014-09-30 09:09:33 Origin： Remark：0 Click：
Specifications 409Cb Datasheet, 409Cb Chemical, 409Cb Properties forgings From Melting, ESR & VAR technique, Blooming, Hot forging, Hot rolling, Heat treatment, Straightening, 100% Ultrasonic test ASTM E2375 /SAE AMS 2154 /SEP 1923 /GB/T 4162 /EN 10228-3.
TECHNICAL DATA SHEET - Grade AISI 409Cb
TECHNICAL SPECIFICATIONS - ASTM A276 & A182 & A240
OFFICIAL TEST CERTIFICATE - issued by TUV - SGS - BV
MATERIAL CATEGORY - Ferritic stainless steel
CHEMICAL COMPOSITION (WEIGHT %)
C (％): ≤ 0.06
Si (％): ≤ 1.00
Mn (％): ≤ 1.00
P (％)≤: 0.045
S (％)≤: 0.040
Cr (％): 10.5 ~ 11.7
Ni (％): ≤ 0.50
Mo (％): -
Nb (％): 10×C ~ 0.75
MECHANICAL PROPERTIES UNDER ROOM TEMP.
Form: Bbar, plate, strip and forgings
Tensile strength, σb/MPa: 317
Yield strength, σ0.2/MPa: 225
Elongation, δ(％): 20.0
ф(％): -
Hardness (HBW): -
Hardness | HRB: -
Cold bending property: N
METHOD OF MELTING
The alloy is usually produced by AOD / EAF / VIM, followed by electroslag refining (ESR or VAR ) if necessary for special purpose.
AVAILABLE FORMS & DIMENSIONS
Round bar (Diameter): 5.5 ~ 450mm
Wire rod (Diameter): 0.15 ~ 15mm
Flat bar (Thickness X Width): 10 ~ 400 X 15 ~ 650mm
Length: random length, fixed length or based on the customer's special requirement.
Form: wire or straightened bar
TECHNICAL SALES ASSISTANCE
If you meet further on any technical inquiry, pleased to EMAIL our resident team of qualified production engineers, Email us: sales@ccsteels.com.
TECHNICAL SPECIFICATIONS - ASTM A276 & A182 & A240
OFFICIAL TEST CERTIFICATE - issued by TUV - SGS - BV
MATERIAL CATEGORY - Ferritic stainless steel
CHEMICAL COMPOSITION (WEIGHT %)
C (％): ≤ 0.06
Si (％): ≤ 1.00
Mn (％): ≤ 1.00
P (％)≤: 0.045
S (％)≤: 0.040
Cr (％): 10.5 ~ 11.7
Ni (％): ≤ 0.50
Mo (％): -
Nb (％): 10×C ~ 0.75
MECHANICAL PROPERTIES UNDER ROOM TEMP.
Form: Bbar, plate, strip and forgings
Tensile strength, σb/MPa: 317
Yield strength, σ0.2/MPa: 225
Elongation, δ(％): 20.0
ф(％): -
Hardness (HBW): -
Hardness | HRB: -
Cold bending property: N
METHOD OF MELTING
The alloy is usually produced by AOD / EAF / VIM, followed by electroslag refining (ESR or VAR ) if necessary for special purpose.
AVAILABLE FORMS & DIMENSIONS
Round bar (Diameter): 5.5 ~ 450mm
Wire rod (Diameter): 0.15 ~ 15mm
Flat bar (Thickness X Width): 10 ~ 400 X 15 ~ 650mm
Length: random length, fixed length or based on the customer's special requirement.
Form: wire or straightened bar
TECHNICAL SALES ASSISTANCE
If you meet further on any technical inquiry, pleased to EMAIL our resident team of qualified production engineers, Email us: sales@ccsteels.com.
Hot search：409Cb
Previous page：UNS S40930
Last page：S40940
Total list
Monthly rank
- 24ASTM A565 Grade 616
- 21ASTM A538 / AMS 6514
- 19Z15CN24-13
- 19N06102
- 16ASTM 301
- 15S41425
- 15X1CrNiMoCu12-5-2
- 15STS321
- 14Z4CNUD17-11-03FF
- 14BS S126