1Cr12Ni3Mo2VN
2025-11-03 11:11:00 Origin： Remark：0 Click：
Stockist 1Cr12Ni3Mo2VN peeled round bar, flat bar cold drawn 1Cr12Ni3Mo2VN Forgings properties ESR remelted, hot bloomed, UT, forged, rolled, heat treated
TECHNICAL DATA SHEET - GB 1Cr12Ni3Mo2VN
Official test report: issued by TUV - SGS - BV
Material category: heat resisting steel for Turbine blade
Material category: heat resisting steel for Turbine blade
Technical standards: GB/T 20878 - 2007 & GB/J 8732-2014
Typical chemical compositions (mass fraction %)
Carbon, C (％): 0.10 ~ 0.17
Silicon, Si (％): ≤ 0.30
Typical chemical compositions (mass fraction %)
Carbon, C (％): 0.10 ~ 0.17
Silicon, Si (％): ≤ 0.30
Manganese, Mn (％): 0.50 ~ 0.90
Phosphorus, P (％): ≤ 0.020
Sulfur, S (％): ≤ 0.015
Chromium, Cr (％): 11.0 ~ 12.75
Phosphorus, P (％): ≤ 0.020
Sulfur, S (％): ≤ 0.015
Chromium, Cr (％): 11.0 ~ 12.75
Molybdenum, Mo (％): 1.50 ~ 2.00
Nickel, Ni (%): 2.00 ~ 3.00
Vanadium, V (%): 0.25 ~ 0.40
Tungsten, W (%): -
Copper, Cu (%): ≤ 0.15
Nitrogen, N (%): 0.01 ~ 0.05
Aluminum, Al (%): ≤ 0.04
Titanium, Ti (%): ≤ 0.02
MECHANICAL PROPERTIES AND HEAT TREATMENT PRATICE
Condition of heat treatment: QT1 (Quenching 990 ~ 1030 Deg., oil cooled,
Tempering ≥ 560 Deg. X 2, air cooled.)
Tensile strength, Rm ≥ MPa: 1100
Yield strength, Rp0.2 ≥ MPa: 860
Elongation, A5 ≥ (％): 13.0
Yield strength, Rp0.2 ≥ MPa: 860
Elongation, A5 ≥ (％): 13.0
Reduction of area, Z (%): 40.0
Impact strength, AKv2 /J ≥: 54
QT hardness, HB : 331 ~ 363
PRODUCT DESCRIPTION
The alloy is usually produced by AOD / EF / EAF followed by electroslag refining (ESR) / VAR if necessary for special purpose. Bars and, where applicable, forgings are subjected to ultrasonic examination based on the different levels according to the buyers' requirements.
Bars are usually supplied bright in the annealed condition.
Final heat treatment - quenched and tempered, + SRA treated
The alloy is usually produced by AOD / EF / EAF followed by electroslag refining (ESR) / VAR if necessary for special purpose. Bars and, where applicable, forgings are subjected to ultrasonic examination based on the different levels according to the buyers' requirements.
Bars are usually supplied bright in the annealed condition.
Final heat treatment - quenched and tempered, + SRA treated
ADVANTAGED STOCK
High alloy and superalloy for turbine blade
ASTM A565 Grade 616/422/S42200, Grade 615/S41800, XM-32/S64152
17-4PH / 630 / 1.4542, 631, 851, 961, WB36, D6-AC, D6A.
Forms: Bars, Forge piece, Ring, Strip
Non-magnetic alloy
X40MnCrN19/1.3813, X8CrMnN18-18/1.3816, X40MnCr18/1.3817, N1310
Forms: Bars, Forge piece, Ring, Strip
ADVANTAGE & SUPERIOR SERVICE
20+ years Focus On Special Steel Manufacturing and processing.
Stock over 60 grades with a competitive price, along with cutting service for specific requirement.
CNC saw cutting.
Marking by stamping or printing.
Third party inspection service.
Export packing / Export documents.
Transport by Track, Sea, Courier (FedEx, UPS, DHL) and Air Cargo.
20+ years Focus On Special Steel Manufacturing and processing.
Stock over 60 grades with a competitive price, along with cutting service for specific requirement.
CNC saw cutting.
Marking by stamping or printing.
Third party inspection service.
Export packing / Export documents.
Transport by Track, Sea, Courier (FedEx, UPS, DHL) and Air Cargo.
Hot search：1Cr12Ni3Mo2VN
Previous page：1Cr11MoNiW2VNbN
Last page：AISI M6
Total list
Monthly rank
- 21ASTM A565 type 616HT
- 18X8CrMnN20-10
- 142Cr11NiMoNbVN
- 13AM-350
- 13X66Cr13
- 13ASTM A693 Gr. XM-16
- 13SUH310
- 13S42035
- 132Cr20Mn9Ni2Si2N
- 12STS321