N06102
2025-07-28 13:12:00 Origin： Remark：0 Click：
Technical specifications of N06102 round bar, sheet, flat bar, forgings N06102 Wire rod Property from Steelmaking, ESR & VAR technique, Heat treatment, Cold working or machined.
TECHNICAL DATA SHEET - N06102
OFFICIAL TEST CERTIFICATE: issued by TUV - SGS - BV
MATERIAL CATEGORY: Cr-Mo-Fe Ni base alloy
CHEMICAL COMPOSITIONS (mass weight %)
Carbon, C (％): ≤ 0.08
Carbon, C (％): ≤ 0.08
Silicon, Si (％): ≤ 0.40
Manganese, Mn (％): ≤ 0.75
Phosphorus, P (％) ≤: 0.030
Manganese, Mn (％): ≤ 0.75
Phosphorus, P (％) ≤: 0.030
Sulfur, S (％) ≤: 0.015
Chromium, Cr (％): 14.0 ~ 15.0
Chromium, Cr (％): 14.0 ~ 15.0
Nickel, Ni (％): Balance
Molybdenum, Mo (％): 2.75 ~ 3.25
Cobalt, Co (%): -
Cobalt, Co (%): -
Tungsten, W (%): 2.75 ~ 3.25
Aluminum, Al (%): 0.30 ~ 0.60
Aluminum, Al (%): 0.30 ~ 0.60
Copper, Cu (%): -
Titanium, Ti (%): 0.40 ~ 0.70
Ferrum, Fe (% ): 5.00 ~ 9.00
Niobium, Nb (%): 2.70 ~ 3.25
Boron, B (%): 0.003 ~ 0.008
Magnesium, Mg (%): 0.01 ~ 0.05
TYPICAL MECHANICAL PROPERTIES
Tensile strength, σb ≥ MPa:
Yield strength, σ0.2 / MPa: 505
Elongation, δ5 ≥ (％): 35.0
Reduction of area, ф ≥ (％): -
Hardness via heat treatment /HBW: -
Reduction of area, ф ≥ (％): -
Hardness via heat treatment /HBW: -
FORMS AND DIMENSION
Round bar (diameter): 5.5 ~ 450mm
Square bar / flat bar: 3 ~ 350mm
Square bar / flat bar: 3 ~ 350mm
Wire rod (diameter): 0.50 ~ 16mm
Steel strip via cold rolled: T0.1 - 3mm X W5 - 650mm X L (or in coil form)
Forging piece: Different shapes based on OEM.
Steel strip via cold rolled: T0.1 - 3mm X W5 - 650mm X L (or in coil form)
Forging piece: Different shapes based on OEM.
Other sizes can be supplied to meet specific requirements.
TECHNICAL SALES ASSISTANCE
If you meet further on any material / technical enquiry, pleased to EMAIL our qualified production engineers.E-mail: sales@ccsteels.com.
Hot search：N06102
Previous page：Grade IN-102
Last page：Z3CNU18-09FF
