X5CND16.5
2026-06-15 09:30:00 Origin： Remark：0 Click：
Description X5CND16.5 peeled round bar, Ex-stock X5CND16.5 shaft, X5CND16.5 forgings Inventory properties steelmaking, ESR melting, hot bloomed, UT, hot forged, rolled
TECHNICAL DATA SHEET - X5CND16.5
Official test certificate: issued by TUV - SGS - CNAS
Material category: martensitic stainless steel
Technical specifications: NF EN 10028 - 7
Typical chemical compositions (mass weight - %)
Carbon, C (％): 0.03 ~ 0.06
Silicon, Si (％): 0.30 ~ 0.50
Manganese, Mn (％): 0.60 ~ 1.00
Phosphrous, P (％): ≤ 0.025
Sulfur, S (％): ≤ 0.015
Chromium, Cr (％): 15.0 ~ 16.5
Silicon, Si (％): 0.30 ~ 0.50
Manganese, Mn (％): 0.60 ~ 1.00
Phosphrous, P (％): ≤ 0.025
Sulfur, S (％): ≤ 0.015
Chromium, Cr (％): 15.0 ~ 16.5
Nickel, Ni (%): 4.50 ~ 5.50
Molybdenum, Mo (％): 0.80 ~ 1.20
Molybdenum, Mo (％): 0.80 ~ 1.20
Nitrgoen, N (%): 0.02 ~ 0.06
MECHANICAL PROPERTIES UNDER ROOM TEMP.
Condition of heat treatment: QT1
Tensile strength, σb ≥ MPa: 760 ~ 960
Yield strength, σ0.2 ≥ MPa: 550
Yield strength, σ0.2 ≥ MPa: 550
Elontation, δ5 ≥ (％): 14.0
Reduction of area, ф ≥ (％): -
Hardness | HBW: 292 max.
Reduction of area, ф ≥ (％): -
Hardness | HBW: 292 max.
Condition of heat treatment: QT 2
Tensile strength, σb ≥ MPa: 900 ~ 1000
Yield strength, σ0.2 ≥ MPa: 700
Yield strength, σ0.2 ≥ MPa: 700
Elontation, δ5 ≥ (％): 14.0
Reduction of area, ф ≥ (％): -
Hardness | HBW: 310 max.
Reduction of area, ф ≥ (％): -
Hardness | HBW: 310 max.
PRODUCT DESCRIPTION
The alloy is usually produced by BEF & AOD followed by electroslag remelting (ESR) / VAR if necessary for special purpose. Bars and, where applicable, forgings are subjected to ultrasonic examination based on the different levels according to the buyers' requirements.
Bars are usually supplied black / bright in the annealed condition.
The alloy is usually produced by BEF & AOD followed by electroslag remelting (ESR) / VAR if necessary for special purpose. Bars and, where applicable, forgings are subjected to ultrasonic examination based on the different levels according to the buyers' requirements.
Bars are usually supplied black / bright in the annealed condition.
FORMS & DIMENSIONS AVAILABLE
Round bar / disc (diameter): 6.0 ~ 850 mm
Square bar / flat bar: 3 ~ 650 mm
Round bar / disc (diameter): 6.0 ~ 850 mm
Square bar / flat bar: 3 ~ 650 mm
Wire rod (Diameter): 0.10 ~ 16mm
Steel strip via cold rolled: T0.1 - 3mm X W5 - 650mm X L (or in coil form)
Forging piece: Different shapes based on OEM.
Steel strip via cold rolled: T0.1 - 3mm X W5 - 650mm X L (or in coil form)
Forging piece: Different shapes based on OEM.
TECHNICAL SALES ASSISTANCE & SERVICE
If you meet further on any technical enquiry, pleased to EMAIL our resident team of qualified production engineers. E-mail: sales@ccsteels.com.
If you meet further on any technical enquiry, pleased to EMAIL our resident team of qualified production engineers. E-mail: sales@ccsteels.com.
Hot search：X5CND16.5
Previous page：Jethete M-152
Last page：X11CrNiWTi17-13-3
