N08065
2019-06-05 09:00:08 Origin： Remark：0 Click：
Technical specifications of alloys N08065 datasheet, N08065 Chemical compositions,UNS N08065 mechanical properties from Steelmaking, ESR & VAR technique, Blooming, Hot forging, Hot rolling, Heat treatment, Straightening, 100% Ultrasonic flaw detection test, Cold working or Machined. All of these materials conform to Military standard, nuclear power. 100% Ultrasonic test ASTM E2375 /SAE AMS 2154 /SEP 1923 /GB/T 4162 /EN 10228-3.
TECHNICAL DATA SHEET - Grade N08065
OFFICIAL TEST CERTIFICATE: issued by TUV - SGS - BV
MATERIAL CATEGORY: Cr-Ni-Mo Fe base Superalloy
CHEMICAL COMPOSITION (WEIGHT %)
C (％): ≤ 0.05
C (％): ≤ 0.05
Si (％): ≤ 0.50
Mn (％): ≤ 1.00
P (％)≤: 0.030
Mn (％): ≤ 1.00
P (％)≤: 0.030
S (％)≤: 0.020
Cr (％): 19.5 ~ 23.5
Cr (％): 19.5 ~ 23.5
Ni (％): 38.0 ~ 46.0
Mo (％): 2.50 ~ 3.50
Co (%): -
Co (%): -
W (%): -
Al (%): ≤ 0.20
Al (%): ≤ 0.20
Cu (%): 1.50 ~ 3.00
Ti (%): 0.60 ~ 1.20
Fe (% ): 22.0 min.
TYPICAL MECHANICAL PROPERTIES
Tensile strength, σb/≥ MPa: 550
Yield strength, σ0.2/MPa: -
Elongation, δ ≥(％): 25.0
Reduction of area, ф ≥ (％): -
Hardness via heat treatment /HBW: -
AVAILABLE FORMS AND SHAPES
Round bar (Diameter): 5.50 ~ 450mm
Square bar / Flat bar: 3 ~ 350mm
Reduction of area, ф ≥ (％): -
Hardness via heat treatment /HBW: -
AVAILABLE FORMS AND SHAPES
Round bar (Diameter): 5.50 ~ 450mm
Square bar / Flat bar: 3 ~ 350mm
Wire rod (Diameter): 0.10 ~ 16mm
Steel strip via cold rolled: T0.1 - 3mm X W5 - 650mm X L (or in coil form)
Forging piece: Different shapes based on OEM.
Steel strip via cold rolled: T0.1 - 3mm X W5 - 650mm X L (or in coil form)
Forging piece: Different shapes based on OEM.
Other sizes can be supplied to meet specific requirements.
TECHNICAL SALES ASSISTANCE
If you meet further on any technical enquiry, pleased to EMAIL our qualified production engineers.
If you meet further on any technical enquiry, pleased to EMAIL our qualified production engineers.
Hot search：N08065
Previous page：Moly Ascoloy
Last page：Inconel 600
