AMS 5501 Stockist, AMS 5501 Equivalent Steel

AMS 5501
2024-09-26 08:28:21   Origin:   Remark:0 Click:

Austenitic Steel AMS 5501 Corrosion Resistant, Sheet, Strip, and Foil 19Cr – 9.5Ni (304) Cold Rolled, 862 MPa Tensile Strength, Stock available
 
TECHNICAL DATA SHEET - AMS 5501

Stock available - Plate, Sheet, Strip
Material Category: 18Cr - 9.5Ni Austenitic stainless
Material Specifications: AMS 5501E
Special Melting Process: EAF + VD + LF / EF + AOD / + ESR
H S Code For Customs: 7220 2030 / 7220 1200 / 7220.1100
 
TYPICAL CHEMICAL COMPOSITIONS (mass fraction - %)
Carbon, C (%): ≤ 0.08
Manganese, Mn (%): ≤ 2.00
Silicon, Si (%): 0.25 ~ 1.00
Phosphorus, P (%) ≤: 0.040
Sulfur, S (%) ≤: 0.030
Chromium, Cr (%): 18.0 ~ 20.0
Nickel, Ni (%): 8.00 ~ 11.0
Molydenum, Mo (%): ≤ 0.75
Copper, Cu (%): ≤ 0.75
 
Conditon: solution heat treated and temper cold rolled.
Tensile strength, Rm ≥ MPa: 862
Yield strength, Ro0.2 / MPa: 517
Elongation, A5 ≥ (%): 15.0
Reduction of area, Z ≥ (%): -
Hardness via heat treatment / HBW: -
 
PRODUCT DESCRIPTION
The material is usually produced by AOD / VOD / EAF followed by electroslag refining (ESR) / VAR if necessary for special purpose.
Bars and, where applicable, forgings are subjected to ultrasonic examination based on the different levels according to the buyers' requirements.
Bars are usually supplied black/bright in the softened condition.
Final heat treatment - solution treatment.
 
TECHNICAL SALES ASSISTANCE
If you meet further on any technical enquiry, pleased to EMAIL (
sales@ccsteels.com) our qualified production engineers.

Hot search:

Previous page:MnCrWV
Last page:最后一页

Share to: