AMS 6497
2020-01-03 09:05:53 Origin： Remark：0 Click：
AMS 6497 Wholesalers Steels,AMS 6497 Ex-stock Suppliers & Manufacturers,AMS 6497 Forge bar Plate machined, AMS 6497 Alloy exporters, from Melting, ESR & VAR technique, Blooming, Hot forging, Hot rolling, Heat treatment, Straightening, 100% Ultrasonic flaw detection test,
TECHNICAL DATA SHEET - AMS 6497
MATERIAL TYPE - Cr-Ni-Mo Alloy steel
MELTING PROCESS - Consumable electrode remelted steel
TECHNICAL SPECIFICATION - SAE AMS 6497A
MELTING PROCESS - Consumable electrode remelted steel
TECHNICAL SPECIFICATION - SAE AMS 6497A
OFFICIAL TEST REPORT - issued by TUV - SGS - BV
CHEMICAL COMPOSITION ( Mass Weight % )
C (％): 0.29 ~ 0.36
Si (％): ≤ 0.30
Mn (％): 0.70 ~ 1.20
C (％): 0.29 ~ 0.36
Si (％): ≤ 0.30
Mn (％): 0.70 ~ 1.20
P (％)≤: 0.015
S (％)≤: 0.005
Cr (%): 1.10 ~ 1.60
Mo (%): 0.90 ~ 1.40
S (％)≤: 0.005
Cr (%): 1.10 ~ 1.60
Mo (%): 0.90 ~ 1.40
Ni (%): 0.50 ~ 1.00
V (%): 0.20 ~ 0.40
Al (%): 0.10 ~ 0.30
MECHANICAL PROPERTY UNDER ROOM TEMP.
Tensile strength, σb/≥ MPa: 1080 ~ 1250
Yield strength, σ0.2/MPa: 900
Elongation, δ ≥(％): 11.0
Reduction of area, ф ≥ (％): -
Hardness via heat treatment /HBW: 375 ~ 450
Reduction of area, ф ≥ (％): -
Hardness via heat treatment /HBW: 375 ~ 450
PRODUCT DESCRIPTION
The alloy is usually produced by EAF / BEF / VIM followed by electroslag refining (ESR or VAR) if necessary for special purpose.
Bars and, where applicable, forgings are subjected to ultrasonic examination based on the different levels according to the buyers' specific requirements.
Round bar / Wire rod (Diameter): 5.5mm to 500mm
Square bar / Flat bar: 10mm to 800mm
Length: Fixed length or random length or based on the customer's special requirement.
Heavy/middle plate via hot rolled: T60 - 400mm X W60 - 1200mm X L1000 ~ 5000mm
Forging piece: stepped shafts with flanks / discs /tubes /slugs /donuts /cubes /other different shapes based on OEM.
The alloy is usually produced by EAF / BEF / VIM followed by electroslag refining (ESR or VAR) if necessary for special purpose.
Bars and, where applicable, forgings are subjected to ultrasonic examination based on the different levels according to the buyers' specific requirements.
Round bar / Wire rod (Diameter): 5.5mm to 500mm
Square bar / Flat bar: 10mm to 800mm
Length: Fixed length or random length or based on the customer's special requirement.
Heavy/middle plate via hot rolled: T60 - 400mm X W60 - 1200mm X L1000 ~ 5000mm
Forging piece: stepped shafts with flanks / discs /tubes /slugs /donuts /cubes /other different shapes based on OEM.
TECHNICAL SALES ASSISTANCE & SERVICE
If you meet further on any technical enquiry or help, pleased to EMAIL (sales@ccsteels.com) our resident team of qualified production engineers.
If you meet further on any technical enquiry or help, pleased to EMAIL (sales@ccsteels.com) our resident team of qualified production engineers.
