2014-09-12 10:28:10 Origin： Remark： Click：
Description 1.4923 Suppliers, Round bar 1.4923 Stocklist, Inventory 1.4923 Ring machined from Melting, ESR & VAR processing technique, Blooming, Hot forging & rolling, Heat treatment, Straightening, 100% Ultrasonic flaw detection test,
TECHNICAL DATA SHEET - Grade W-Nr 1.4923
MATERIAL CATEGORY - High temperature high strength steel and superalloy
MATERIAL SPECIFICATIONS - DIN 17742, 17460, 17480, DIN EN 10302, 10296, 10095
CHEMICAL COMPOSITION (Mass weight - %)
MECHANICAL PROPERTIES - HOT WORKING, HEAT TREATMENT AND HARDNESS
C (％): 0.18 ~ 0.24
Si (％): 0.18 ~ 0.24
Mn (％): 0.40 ~ 0.90
P (％)≤: 0.025
S (％)≤: 0.015
Cr (％): 11.0 ~ 12.5
Ni (％): 0.30 ~ 0.80
Mo (％): 0.80 ~ 1.20
V (％): 0.25 ~ 0.35
Non-scale temperature in air /℃: 600
Hot forming temperature /℃: 1100～850
Heat treatment temperature /℃ | annealing: 750~780
Heat treatment temperature /℃ | quenching or solution: 1035 ~ 1065 air / oil
Heat treatment temperature /℃ | tempering: 700~750
Heat treatment temperature /℃ | ageing: 630~750
Condition: heat treatment
Mechanical property under room temperature |σb/MPa: 800 ~ 950
Mechanical property under room temperature |σs≥/MPa: 600
Mechanical property under room temperature |δ5≥(％): 14
Mechanical property under room temperature |Akv(DVM): 34
Heat stability temperature/℃: 580
Superalloy is widely used to produce the high temperature components for gas turbine in the field of aviation, naval vessels and industry, such as turbine blade, guide blade, turbine disc, high pressure compressor disc, combustor, and also production of energy conversion devices, such as aerospace craft, rocket motor, nuclear reactor, petrochemical equipments, coaly transforming and so on.
Heat treating fixture
Turbine engine parts - mechanical gears, gear shaft, main axis, blade
Mechanical parts - bolt and nut, fastener
Heat treatment furnace flask and components, especially in the carbonization.
These materials must stand up to high heat, extreme oxidation potential and recycling.
The alloy is usually produced by AOD / EAF followed by electroslag refining (ESR or VAR) if necessary for special purpose.
Bars and, where applicable, forgings are subjected to ultrasonic examination based on the different level according to the buyers' requirements.
Bars are usually supplied bright in the solution annealing condition.
Final heat treatment - heat treatment / QT / solution treatment
Round bar / flat bar / square bar / forgings / plate
Bright - peeled + polishing /centerless grinding /peeled + slidabrading
Forged - ring / pipe casing / discs / shaft
PRODUCT PROFILE & DIMENSIONS
Round bar / Wire rod (Diameter): 5.5mm to 550mm
Square bar / Flat bar: 10mm to 800mm
Plate / Sheet steel / Steel strip: 0.5mm to 200mm
Width: 8mm to 1200mm
Length: random length or based on the customer's special requirement.
Forged steel shape: stepped shafts with flanks / discs /tubes /slugs /donuts /cubes /other different shapes based on OEM.
TECHNICAL SALES ASSISTANCE
If you meet further on any technical enquiry, pleased to Email (firstname.lastname@example.org) or call our resident team of qualified production engineers.