AMS 5581F
2021-06-04 08:30:56 Origin： Remark：0 Click：
Inventory AMS 5581F Specifications, AMS 5581F Data sheet, Chemical AMS 5581F Stockholder from Steelmelting (ESR refined), Blooming, Hot forging, Hot rolling, Heat treatment, Straightening, 100% Ultrasonic flaw detection test, Cold working or Machined. All of these materials conform to Military standard, nuclear power. 100% Ultrasonic test ASTM E2375 /SAE AMS 2154 /SEP 1923 /GB/T 4162 /EN 10228-3.
TECHNICAL STANDARD - AMS 5581F
Material Category - Aerospace Material Steel Series
Techncial Specifications - AMS 5581F
HS Code for Customs - 72221100 / 72221900 / 72223000
Techncial Specifications - AMS 5581F
HS Code for Customs - 72221100 / 72221900 / 72223000
Official Test Report - issued by TUV - SGS - BV
Chemical compositions (Mass weight %)
Chemical compositions (Mass weight %)
C (％): ≤ 0.10
Si (％): ≤ 0.50
Mn (％): ≤ 0.50
P (％)≤: 0.015
S (％)≤: 0.015
Cr (％): 20.0 ~ 23.0
Ni (％): Remainder
Si (％): ≤ 0.50
Mn (％): ≤ 0.50
P (％)≤: 0.015
S (％)≤: 0.015
Cr (％): 20.0 ~ 23.0
Ni (％): Remainder
Mo (%): 8.00 ~ 10.0
Co (％): ≤ 1.00
Co (％): ≤ 1.00
Nb (％): 3.15 ~ 4.15
Ti (％): ≤ 0.40
Al (%): ≤ 0.40
Fe (%): ≤ 5.00
MECHANICAL PROPERTIES UNDER ROOM TEMP.
Form: Bars, plate, tubings and forgings
Form: Bars, plate, tubings and forgings
Heat treatment condition: solution annealing treated
Tensile strength, σb/MPa: 827
Yield strength, σ0.2/MPa: 414
Elongation, δ(％): 35.0
Reduction of area, ф (％): -
Elongation, δ(％): 35.0
Reduction of area, ф (％): -
Hardness | HRW: 361min, HRC 36min.
FORMS & DIMENSIONS
Round bar: 5.5mm to 500mm
Square bar / Flat bar: 10mm to 550mm
Wire rod: 0.5mm to 13.0mm
Steel strip: THK0.5 ~ 3.0mm, Width 10 ~ 350mm
Length: Fixed length or random length or based on the customer's special requirement.
Other different shapes based on OEM.
TECHNICAL SALES ASSISTANCE & SERVICE
If you meet further on any technical enquiry, pleased to EMAIL our resident team of qualified production engineers. E-mail: sales@ccsteels.com.
FORMS & DIMENSIONS
Round bar: 5.5mm to 500mm
Square bar / Flat bar: 10mm to 550mm
Wire rod: 0.5mm to 13.0mm
Steel strip: THK0.5 ~ 3.0mm, Width 10 ~ 350mm
Length: Fixed length or random length or based on the customer's special requirement.
Other different shapes based on OEM.
TECHNICAL SALES ASSISTANCE & SERVICE
If you meet further on any technical enquiry, pleased to EMAIL our resident team of qualified production engineers. E-mail: sales@ccsteels.com.
