Corrosion resisting steel 1.4597
2026-09-23 16:08:00 Origin： Remark：0 Click：
Austenitic corrosion resisting steel 1.4597 round bar, Inventory 1.4597 properties from steelmaking, 1.4597 hot forging, hot rolling, heat treatment, cold working.
TECHNICAL DATA SHEET - W-Nr 1.4597
Material category: austenitic corrosion resisting steels
Stock in hand: round bar 30 / 42 mm
Technical specifications: DIN 17445,DIN 10088-1,10297,10272,10312,DIN EN 10088-5
Typical chemical elements (mass fraction - %)
Carbon, C (％): ≤ 0.10
Silicon, Si (％): ≤ 2.00
Manganese, Mn (％): 6.50 ~ 8.50
Phosphorus, P (％): ≤ 0.040
Sulfur, S (％): ≤ 0.030
Chromium, Cr (％): 16.0 ~ 18.0
Nickel, Ni (％): ≤ 2.00
Molybdenum, Mo (％): ≤ 1.00
Nitrogen, N (％): 0.15 ~ 0.30
Silicon, Si (％): ≤ 2.00
Manganese, Mn (％): 6.50 ~ 8.50
Phosphorus, P (％): ≤ 0.040
Sulfur, S (％): ≤ 0.030
Chromium, Cr (％): 16.0 ~ 18.0
Nickel, Ni (％): ≤ 2.00
Molybdenum, Mo (％): ≤ 1.00
Nitrogen, N (％): 0.15 ~ 0.30
Copper, Cu (%): 2.00 ~ 3.50
Boron, B (%): 0.0005 ~ 0.0050
MECHANICAL PROPERTIES UNDER ROOM TEMP.
Heat treatment: solution annealed
Product form: cold rolled
Thickness: ≤ 8 (Hot rolled 13.5)
Tensile strength, σb / MPa: 580 ~ 780
Yield strength, σ0.2 ≥ MPa: 300
Elongation, δ5 ≥ (％): 25.0
Yield strength, σ0.2 ≥ MPa: 300
Elongation, δ5 ≥ (％): 25.0
Reduction of area, ψ ≥ (％): -
Impact strength, Akv ≥ J: -
hardness HBW: -
Impact strength, Akv ≥ J: -
hardness HBW: -
HEAT TREATMENT PRACTICE
Heat treatment is only suitable for specific grades of stainless steel. When heat treating a stainless the hardening temperatures, including rate of heating, cooling and soaking times will vary due to several factors such as the shape and size of each component. Other considerations during the heat treatment process include the type of furnace, quenching medium and work piece transfer facilities. Please consult with the heat treatment provider for whole guidance on heat treatment of stainless steel grades. We are delighted to help to work with you the special heat treatment based on your special requirements.
Heat treatment is only suitable for specific grades of stainless steel. When heat treating a stainless the hardening temperatures, including rate of heating, cooling and soaking times will vary due to several factors such as the shape and size of each component. Other considerations during the heat treatment process include the type of furnace, quenching medium and work piece transfer facilities. Please consult with the heat treatment provider for whole guidance on heat treatment of stainless steel grades. We are delighted to help to work with you the special heat treatment based on your special requirements.
PRODUCT DESCRIPTION
The alloy is usually produced by EAF, LF, VD, or AOD followed by electroslag refining (ESR) / VAR if necessary for special purpose. Bars and, where applicable, forgings are subjected to ultrasonic examination based on the different levels according to the buyers' requirements.
Bars are usually supplied black/bright in the annealed condition.
Final heat treatment - QT
The alloy is usually produced by EAF, LF, VD, or AOD followed by electroslag refining (ESR) / VAR if necessary for special purpose. Bars and, where applicable, forgings are subjected to ultrasonic examination based on the different levels according to the buyers' requirements.
Bars are usually supplied black/bright in the annealed condition.
Final heat treatment - QT
Medical equipment, Chemical equipments.
Mechanical parts used in the condition of corrosion resistance.
Bolt and nut, pressure vessel.
Mechanical parts used in the condition of corrosion resistance.
Bolt and nut, pressure vessel.
PRODUCT PROFILE & DIMENSIONS
Round bar, rod, disc (diameter): 5.5 to 950 mm
Square bar, flat bar: 8 to 600 mm
Round bar, rod, disc (diameter): 5.5 to 950 mm
Square bar, flat bar: 8 to 600 mm
Length: random length or based on the customer's special requirement.
Heavy / middle plate via hot rolled: T6 ~ 400 X W50 ~ 1000 X L1000 - 12000mm
Heavy / middle plate via hot rolled: T6 ~ 400 X W50 ~ 1000 X L1000 - 12000mm
Sheet steel via cold rolled: T0.5 ~ 6 X W20 ~ 1000 X L1000 - 2000mm
Steel strip via cold rolled: T0.3 ~ 3 X W10 ~ 200 X L (or in coil form)
Forging piece: stepped shafts, other different shapes based on OEM.
Hot search：1.4597
Previous page：X8CrMnCuNB17-8-3
Last page：X2CrNiMoCuS17-10-2
