St950
2015-03-02 10:23:13 Origin： Remark：0 Click：
St950 Specifications, St950 Chemical, St950 Ring forging, St950 rolled flat bar steelmaking,ESR, Blooming, Hot forging & Rolling, Heat treatment, Straightened, Ultrasonic test, Cold working, Machined. We also possess advanced precision machining equipments for further processing.
Technical standards - DIN SEW 390 (1991) or by agreement.
TECHNICAL DATA SHEET - X40MnCr18 & St950
MATERIAL SPECIFICATIONS: DIN SEW 390 (1991)
CHEMICAL COMPOSITION (WEIGHT %)
C (％): 0.30 ~ 0.50
Si (％): ≤ 1.00
Mn (％): 17.5 ~ 19.0
P (％)≤: 0.060
S (％)≤: 0.030
Cr (％): 3.00 ~ 5.00
Si (％): ≤ 1.00
Mn (％): 17.5 ~ 19.0
P (％)≤: 0.060
S (％)≤: 0.030
Cr (％): 3.00 ~ 5.00
Ni (％): ≤ 1.00
Mo (％): -
N (％): ≤ 0.10
Mo (％): -
N (％): ≤ 0.10
HOT WORKING, HEAT TREATMENT AND MECHANICAL PROPERTIES
Hot working temperature: 1150 ~ 950℃
Quenching or solution treatment temperature: 1000 ~ 1100℃
Tensile strength, σb≥ /MPa: 750 ~ 950
Yield strength, σ0.2 ≥/MPa: 280
Elongation, δ≥(％): 35
Impact strength, Akv ≥/J: 85 (transversal value)
Yield strength, σ0.2 ≥/MPa: 280
Elongation, δ≥(％): 35
Impact strength, Akv ≥/J: 85 (transversal value)
PRODUCT DESCRIPTION
The alloy is usually produced by BEF AOD / EAF VD followed by electroslag refining (ESR) / VAR if necessary for special purpose.
Bars and, where applicable, forgings are subjected to ultrasonic examination based on the different levels according to the buyers' requirements.
Bars are usually supplied black / bright in the annealed condition.
Final heat treatment - solution treatment / QT
The alloy is usually produced by BEF AOD / EAF VD followed by electroslag refining (ESR) / VAR if necessary for special purpose.
Bars and, where applicable, forgings are subjected to ultrasonic examination based on the different levels according to the buyers' requirements.
Bars are usually supplied black / bright in the annealed condition.
Final heat treatment - solution treatment / QT
PRODUCT PROFILE
Round bar (Diameter): 5.5mm to 600mm
Square bar / Flat bar: 3mm to 800mm
Round bar (Diameter): 5.5mm to 600mm
Square bar / Flat bar: 3mm to 800mm
Wire rod (Diameter): 0.50 ~ 15mm
Length: Fixed length or random length or based on the customer's special requirement.
Forging piece: stepped shafts with flanks / discs /tubes /slugs /donuts /cubes /other different shapes based on OEM.
Pipes / Tubings: OD30 - 1200mm, with wall thickness ranging from 15 to 350 mm.
Length: Fixed length or random length or based on the customer's special requirement.
Forging piece: stepped shafts with flanks / discs /tubes /slugs /donuts /cubes /other different shapes based on OEM.
Pipes / Tubings: OD30 - 1200mm, with wall thickness ranging from 15 to 350 mm.
TECHNICAL SALES ASSISTANCE
If you meet further on any technical enquiry, pleased to EMAIL our resident team of qualified production engineers, E-mail: sales@ccsteels.com
Hot search：St950
Previous page：X40MnCr18
Last page：X55MnCrN18-4
