7C27Mo2
2025-07-28 01:11:00 Origin： Remark：0 Click：
Specifications 7C27Mo2 Round bar, Flat bar and Forgings 7C27Mo2 Properties from Steelmelting (ESR refined), Hot forging, Hot rolling, Heat treatment
TECHNICAL DATA SHEET - 7C27Mo2
OFFICIAL TEST CERTIFICATE - issued by TUV - SGS - BV
MATERIAL CATEGORY - Martensitic stainless steel
MATERIAL STANDARDS - ASTM A276, ASTM F899
APPLICATION FIELD - cutters & food processing equipment
CHEMICAL COMPOSITIONS (mass weight %)
Carbon, C (％): 0.35 ~ 0.42
Silicon, Si (％): 0.15 ~ 0.50
Manganese, Mn (％): 0.30 ~ 0.90
Phosphorus. P (％) ≤: 0.025
Sulfur, S (％) ≤: 0.010
Chromium, Cr (％): 13.0 ~ 13.8
Nickel, Ni (％): -
Molybdenum, Mo (％): 1.00 ~ 1.50
PRODUCT DESCRIPTION
The alloy is usually produced by AOD / VOD / EAF followed by electroslag refining (ESR) / VAR if necessary for special purpose. Bars and, where applicable, forgings are subjected to ultrasonic examination based on the different levels according to the buyers' requirements.
Bars are usually supplied bright in the annealed condition.
Final heat treatment - quenched and tempered.
Silicon, Si (％): 0.15 ~ 0.50
Manganese, Mn (％): 0.30 ~ 0.90
Phosphorus. P (％) ≤: 0.025
Sulfur, S (％) ≤: 0.010
Chromium, Cr (％): 13.0 ~ 13.8
Nickel, Ni (％): -
Molybdenum, Mo (％): 1.00 ~ 1.50
PRODUCT DESCRIPTION
The alloy is usually produced by AOD / VOD / EAF followed by electroslag refining (ESR) / VAR if necessary for special purpose. Bars and, where applicable, forgings are subjected to ultrasonic examination based on the different levels according to the buyers' requirements.
Bars are usually supplied bright in the annealed condition.
Final heat treatment - quenched and tempered.
Heavy/middle plate via hot rolled: T6 ~ 400 X W60 - 1200 X L1000 ~ 12000mm
Sheet steel via cold rolled: T0.5 ~ 6 X W100 - 1000 X L1000 ~ 2000mm
Steel strip via cold rolled: T0.1 ~ 3 X W5 ~ 200 X L (or in coil form)
Forging piece: stepped shaft, and other different shapes based on OEM.
Sheet steel via cold rolled: T0.5 ~ 6 X W100 - 1000 X L1000 ~ 2000mm
Steel strip via cold rolled: T0.1 ~ 3 X W5 ~ 200 X L (or in coil form)
Forging piece: stepped shaft, and other different shapes based on OEM.
TECHNICAL SALES ASSISTANCE
If you meet further on any technical enquiry, pleased to EMAIL our resident team of qualified production engineers. - Email sales@ccsteels.com.
If you meet further on any technical enquiry, pleased to EMAIL our resident team of qualified production engineers. - Email sales@ccsteels.com.
Hot search：7C27Mo2
