Super 13Cr
2014-11-10 15:21:30 Origin： Remark：0 Click：
Martensitic stainless steel 13Cr-5Ni-2Mo Super 13Cr Round bar, S41425 Flat bar, Stock Available, from steelmaking, hot forging, Heat treatment
RAW MATERIAL DATA SHEET - Super alloy 13Cr
MATERIAL CATEGORY: Martensitic stainless steel 13Cr-5Ni-2Mo
PRODUCT DESCRIPTION
The alloy is usually produced by AOD / VOD / VIM followed by electroslag refining (ESR) / VAR if necessary for special purpose. Bars and, where applicable, forgings are subjected to ultrasonic examination based on the different levels according to the buyers' requirements.
Bars are usually supplied black/bright in the annealed condition.
Final heat treatment - solution treatment / QT
The alloy is usually produced by AOD / VOD / VIM followed by electroslag refining (ESR) / VAR if necessary for special purpose. Bars and, where applicable, forgings are subjected to ultrasonic examination based on the different levels according to the buyers' requirements.
Bars are usually supplied black/bright in the annealed condition.
Final heat treatment - solution treatment / QT
MATERIAL SPECIFICATIONS - ASTM A959 (2004), A276, A312, A632, A176, A580, A564
CHEMICAL COMPOSITION (mass weight - %)
Carbon, C (％): ≤ 0.030
Silicon, Si (％): ≤ 0.50
Manganese, Mn (％): ≤ 0.50
Phosphorus, P (％) ≤: 0.020
Sulfur, S (％) ≤: 0.005
Chromium, Cr (％): 11.5～13.5
Nickel, Ni (％): 4.50 ~ 6.50
Molybdenum, Mo (％): 1.80 ~ 3.00
Other (％): Ti + Nb ≤ 0.50, V ≤ 0.50
Silicon, Si (％): ≤ 0.50
Manganese, Mn (％): ≤ 0.50
Phosphorus, P (％) ≤: 0.020
Sulfur, S (％) ≤: 0.005
Chromium, Cr (％): 11.5～13.5
Nickel, Ni (％): 4.50 ~ 6.50
Molybdenum, Mo (％): 1.80 ~ 3.00
Other (％): Ti + Nb ≤ 0.50, V ≤ 0.50
MECHANICAL PROPERTIES FINAL HEAT TREATMENT
Heat treatment condition: hardened & tempered
Tensile strength, Rm MPa: 800 Min
Yield strength, Rp0.2≥/MPa: 759 Min
Elongation, A≥ (％): 15
Yield strength, Rp0.2≥/MPa: 759 Min
Elongation, A≥ (％): 15
Reduction of area, ψ ≥ (％): -
Impact strength, Akv≥ J: -
Impact strength, Akv≥ J: -
Super alloy 13Cr is a low carbon martensitic steel with high corrosion resistance.
This material is typically used in fully-setting equipment and environments contains Chlorides and CO2
HEAT TREATMENT PRACTICE
Heat treatment is only suitable for specific grades of stainless steel. When heat treating a stainless the hardening temperatures, including rate of heating, cooling and soaking times will vary due to several factors such as the shape and size of each component. Other considerations during the heat treatment process include the type of furnace, quenching medium and work piece transfer facilities. Please consult with the heat treatment provider for whole guidance on heat treatment of stainless steel grades. We are delighted to help to work with you the special heat treatment based on your special requirements.
TYPICAL APPLICATIONS
Chemical equipments and parts.
Mechanical parts used in the condition of corrosion resistance.
Bolt and nuts, Pressure vessel.
Heat treatment is only suitable for specific grades of stainless steel. When heat treating a stainless the hardening temperatures, including rate of heating, cooling and soaking times will vary due to several factors such as the shape and size of each component. Other considerations during the heat treatment process include the type of furnace, quenching medium and work piece transfer facilities. Please consult with the heat treatment provider for whole guidance on heat treatment of stainless steel grades. We are delighted to help to work with you the special heat treatment based on your special requirements.
TYPICAL APPLICATIONS
Chemical equipments and parts.
Mechanical parts used in the condition of corrosion resistance.
Bolt and nuts, Pressure vessel.
PRODUCT SHAPE & DIMENSIONS
Round bar / Disc (diameter): 5.5mm to 800mm
Square bar / Flat bar: 3mm to 1200mm
Plate / Sheet steel / Steel strip: 0.1mm to 200mm
Width: 8mm to 2000mm
Length: random length or based on the customer's special requirement.
Forged steel shape: stepped shaft, and other different shapes based on OEM.
Round bar / Disc (diameter): 5.5mm to 800mm
Square bar / Flat bar: 3mm to 1200mm
Plate / Sheet steel / Steel strip: 0.1mm to 200mm
Width: 8mm to 2000mm
Length: random length or based on the customer's special requirement.
Forged steel shape: stepped shaft, and other different shapes based on OEM.
ADVANTAGE & SUPERIOR SERVICE
20+ years Focus On Special Steel Manufacturing and processing.
Stock over 60 grades with a competitive price, along with cutting service for specific requirement.
CNC saw cutting.
Marking by stamping or printing.
Third party inspection service.
Export packing / Export documents.
Transport by Track, Sea, Courier (FedEx, UPS, DHL) and Air Cargo.
20+ years Focus On Special Steel Manufacturing and processing.
Stock over 60 grades with a competitive price, along with cutting service for specific requirement.
CNC saw cutting.
Marking by stamping or printing.
Third party inspection service.
Export packing / Export documents.
Transport by Track, Sea, Courier (FedEx, UPS, DHL) and Air Cargo.
Previous page：ASTM A693 H1
Last page：44Cr2
Total list
Monthly rank
- 49X35CrMo17
- 42ASTM A565 Gr.616HT
- 37AISI 306
- 30SAE 30304
- 24SAE 51420
- 22GTD 450 / C450
- 21Z50NMC12
- 20P550
- 20X12CrMoWVNbN10-1-1
- 19X2Cr11 / 1.4003
