EN 1.4109 Stockist, EN 1.4109 Equivalent Steel

EN 1.4109
2015-03-17 08:54:36   Origin:   Remark:0 Click:

EN 1.4109 / X70CrMo15 is a Martensitic Chromium-molybdenum base stainless steel, Available forms in round bar, flat bar, sheet, plate and forging pieces - steelmaking, ESR, Blooming, hot forging / Rolling, Heat treatment, Cold machined. material specifications - BS EN 10083-3 (2005)
 
OFFICIAL TEST CERTIFICATE: issued by TUV - SGSBV

TECHNICAL SPECIFICATION DATASHEET - BS X70CrMo15 & EN 1.4109
MATERIAL CATEGORY - Stainless steel round bar, wire rod, and semi-finished products
STEEL TYPE - Martensitic series
MATERIAL SPECIFICATIONS - BS EN 10083-3 (2005)
CHEMICAL COMPOSITION (mas weight %)
C (%):     0.65 ~ 0.75
Si (%):    ≤ 0.70
Mn (%):   ≤ 1.00
P (%)≤:   0.040
S (%)≤:   0.030
Cr (%):    14.0 ~ 16.0
Ni (%):    -
Mo (%):   0.40 ~ 0.80
MECHANICAL PROPERTIES BASED ON THE DIFFERENT HEAT TREATMENT
Thickness/≤mm: 100
Condition of thermal treatment: annealed
Hardness HBS: 280
Yield strength σ0.2≥/MPa: -        
Tensile strength σb/MPa:  ≤900      
Elongation δ( longitudinal )≥(%):  - 
Elongation δ(transversal )≥(%):  -     
Impact absorbing power Akv≥/J|  longitudinal:   —
Impact absorbing power Akv≥/J| transversal :    —
MARTENSITIC STAINLESS STEEL TYPICAL APPLICATIONS
High strength, lower plasticity and weldability. Based on higher carbon content, martensitic steels possess higher strength, hardness, abrasive resistance, but its corrosion resistance is not so good, those steels are for mechanical parts with higher mechanical property and normal corrosion resistance. Such as mechanical spring, blades of steam turbines, hydraulic press valves. Those steels are used after quenching and tempering and annealing after forging, impacting as well.
PRODUCT DESCRIPTION
The alloy is usually produced by AOD / VOD /VIM followed by electroslag refining (ESR) / VAR if necessary for special purpose. Bars and, where applicable, forgings are subjected to ultrasonic examination based on the different levels according to the buyers' requirements.
Bars are usually supplied black/bright in the annealed condition.
Final heat treatment - solution treatment / QT
PRODUCT PROFILE & DIMENSIONS
Round bar / Wire rod (Diameter): 5.5mm to 550mm
Square bar / Flat bar: 10mm to 800mm
Length: Fixed length or random length or based on the customer's special requirement.
Heavy/middle plate via hot rolled: T6 - 200mm X W10 - 1500mm X L1000-12000mm
Sheet steel via cold rolled: T0.5 - 6mm X W6 - 1000mm X L1000 - 2000mm
Steel strip via cold rolled: T0.1 - 3mm X W5 - 200mm X L (or in coil form)
Forging piece: stepped shafts, and other different shapes based on OEM.
TECHNICAL SALES ASSISTANCE
If you meet further on any technical enquiry. pleased to EMAIL our resident team of qualified production engineers, Email: sales@ccsteels.com.

  

Hot search:EN 1.4109

Previous page:BS X70CrMo15
Last page:BS X105CrMo17

Share to: