Mn18Cr18
2026-01-15 15:47:00 Origin： Remark：0 Click：
ASTM A289 & 18Cr18Mn - austenitic steel peeled round bar, flat bar, bolts and nuts 1.3816 forged ring, heat treated, 100% UT
TECHNICAL DATA SHEET: ASTM A289 & 18Mn-18Cr
MATERIAL CATEGORY: 18Mn - 18Cr austenitic steel
PRODUCT DESCRIPTION
The alloy is usually produced by EF / AOD followed by electroslag refining (ESR) / VAR if necessary for special purpose. Bars and, where applicable, forgings are subjected to ultrasonic examination based on the different levels according to the buyers' requirements.
Bars are usually supplied black/bright in the softened condition.
Final heat treatment - solution treatment or quenched and tempered.
TYPICAL CHEMICAL COMPOSITION (mass fraction %)
Carbon, C (%): 0.10 max
Manganese, Mn (%): 17.5 ~ 20.0
Phosphorus, P (%): 0.060 max
Sulfur, S (%): 0.015 max
Silicon, Si (%): 0.80 max
Nickel, Ni (%): 2.00 max
Chromium, Cr (%): 17.5 ~ 20.0
Nitrogen, N (%): 0.40 ~ 0.80
Titanium, Ti (%): 0.10 max
Aluminum, Al (%): 0.04 max
Vanadium, V (%): 0.25 max
Manganese, Mn (%): 17.5 ~ 20.0
Phosphorus, P (%): 0.060 max
Sulfur, S (%): 0.015 max
Silicon, Si (%): 0.80 max
Nickel, Ni (%): 2.00 max
Chromium, Cr (%): 17.5 ~ 20.0
Nitrogen, N (%): 0.40 ~ 0.80
Titanium, Ti (%): 0.10 max
Aluminum, Al (%): 0.04 max
Vanadium, V (%): 0.25 max
Technical Specification: ASTM A289/A289M
Non-magnetic stainless steel reduces the losses in the ring that are caused by eddy currents and thermal stresses. The ring is cold formed to provide the highest yield strength and to ensure plastic deformation does not occur during operation.
Mechanical properties - Room Temperature Mechanical Property Requirements
Grade 1
Tensile Strength,min,MPa | 1000
0.2% Yield Strength,min,MPa | 930
Elongation in 50 mm,min, | % : 28.0
Reduction of Area, min, % : 60.0
Charpy V-Notch energy: 95
Grade 2
Tensile Strength,min,MPa | 1070
0.2% Yield Strength,min,MPa | 1000
Elongation in 50 mm,min, | %: 25.0
Reduction of Area, min, % : 55.0
Charpy V-Notch energy, 88
Grade 3
Tensile Strength,min,MPa | 1140
0.2% Yield Strength,min,MPa | 1105
Elongation in 50 mm,min, | %: 20.0
Reduction of Area, min, % : 50.0
Charpy V-Notch energy, 81
Grade 4
Tensile Strength,min,MPa | 1170
0.2% Yield Strength,min,MPa | 1140
Elongation in 50 mm,min, | %: 19.0
Reduction of Area, min, % : 48.0
Charpy V-Notch energy, 79
Grade 5
Tensile Strength,min,MPa | 1205
0.2% Yield Strength,min,MPa | 1170
Elongation in 50 mm,min, | %: 17.0
Reduction of Area, min, % : 45.0
Charpy V-Notch energy, 75
Grade 6
Tensile Strength,min,MPa | 1275
0.2% Yield Strength,min,MPa | 1240
Elongation in 50 mm,min, | %: 14.0
Reduction of Area, min, % : 40.0
Charpy V-Notch energy, 68
Grade 7
Tensile Strength,min,MPa | 1345
0.2% Yield Strength,min,MPa | 1310
Elongation in 50 mm,min, | %: 12.0
Reduction of Area, min, % : 35.0
Charpy V-Notch energy, 54
Grade 8
Tensile Strength,min,MPa | 1380
0.2% Yield Strength,min,MPa | 1345
Elongation in 50 mm,min, | %: 10.0
Reduction of Area, min, % : 30.0
Charpy V-Notch energy, 4
TYPICAL APPLICATIONS
Chemical equipments
Mechanical parts used in the condition of corrosion resistance
Generator ring, Pressure vessel.
PRODUCT PROFILE & DIMENSIONS
Round bar / disc : diameter 10 to 810 mm
Square bar / flat bar: 10 to 550 mm
Plate / sheet steel / steel strip: 10 to 500 mm
Hot search：18Mn18Cr
Previous page：ASTM A289 18Mn-18Cr
Last page：18Cr-18Mn
Total list
Monthly rank
- 21ASTM A565 type 616HT
- 18X8CrMnN20-10
- 142Cr11NiMoNbVN
- 13AM-350
- 13X66Cr13
- 13ASTM A693 Gr. XM-16
- 13SUH310
- 13S42035
- 132Cr20Mn9Ni2Si2N
- 12STS321