AM-350 /A693 Gr.633
2015-09-16 19:56:10 Origin： Remark：0 Click：
Specifications AM-350 /A693 Gr.633 datasheet, AM-350 Chemical, AISI 633 Property Steelmelting (ESR refined), Blooming, Hot forging, Hot rolling, Heat treatment, Straightening, 100% Ultrasonic flaw detection test, Cold working or Machined. All of these materials conform to Military standard, nuclear power. 100% Ultrasonic test ASTM E2375 /SAE AMS 2154 /SEP 1923 /GB/T 4162 /EN 10228-3.
TECHNICAL DATASHEET - Alloy AM350 & Type AISI 633
MATERIAL CATEGORY: Precipitation hardening type 16Cr-4Ni-3Mo-N
PRODUCT DESCRIPTION
The alloy is usually produced by AOD / VOD /VIM followed by electroslag refining (ESR) / VAR if necessary for special purpose.
Bars and, where applicable, forgings are subjected to ultrasonic examination based on the different levels according to the buyers' requirements.
Bars are usually supplied black/bright in the annealed condition.
Final heat treatment - solution treatment / QT
The alloy is usually produced by AOD / VOD /VIM followed by electroslag refining (ESR) / VAR if necessary for special purpose.
Bars and, where applicable, forgings are subjected to ultrasonic examination based on the different levels according to the buyers' requirements.
Bars are usually supplied black/bright in the annealed condition.
Final heat treatment - solution treatment / QT
AVAILABILITY
Round bar / flat bar / steel strip / square bar / hollow bar / forgings
Bright - peeled + polishing, centerless grinding
Forged - ring, tube, pipe casing, discs, shaft
Round bar / flat bar / steel strip / square bar / hollow bar / forgings
Bright - peeled + polishing, centerless grinding
Forged - ring, tube, pipe casing, discs, shaft
MATERIAL SPECIFICATIONS - ASTM A693, AMS 5548
CHEMICAL COMPOSITION (WEIGHT %)
C (％): 0.07 ~ 0.11
Si (％): ≤ 0.50
Mn (％): 0.50 ~ 1.25
P (％)≤: 0.040
S (％)≤: 0.030
Cr (％): 16.0 ~ 17.0
Ni (％): 4.00 ~ 5.00
Mo (％): 2.50 ~ 3.20
N (％): 0.07 ~ 0.13
Si (％): ≤ 0.50
Mn (％): 0.50 ~ 1.25
P (％)≤: 0.040
S (％)≤: 0.030
Cr (％): 16.0 ~ 17.0
Ni (％): 4.00 ~ 5.00
Mo (％): 2.50 ~ 3.20
N (％): 0.07 ~ 0.13
MECHANICAL PROPERTIES FINAL HEAT TREATMENT OR Q/T
Form: plate,sheet,strip
Condition: annealing
σb/MPa: ≤1380
σ0.2/MPa: 585~620
δ(％): 8~12
δ(％): 8~12
ф(％): -
Hardness | HRB: ≤30
Form: plate,sheet,strip
Condition: H850
σb/MPa: 1175
σ0.2/MPa: 1030
δ(％): 2~8
ф(％): -
δ(％): 2~8
ф(％): -
Hardness | HRB: ≥42
Form: plate,sheet,strip
Condition: H1000
σb/MPa: 1140
σ0.2/MPa: 1000
δ(％): 2~8
ф(％): -
δ(％): 2~8
ф(％): -
Hardness | HRB: ≥36
HEAT TREATMENT PRACTICE
Heat treatment is only suitable for specific grades of stainless steel. When heat treating a stainless the hardening temperatures, including rate of heating, cooling and soaking times will vary due to several factors such as the shape and size of each component. Other considerations during the heat treatment process include the type of furnace, quenching medium and work piece transfer facilities. Please consult with the heat treatment provider for whole guidance on heat treatment of stainless steel grades. We are delighted to help to work with you the special heat treatment based on your special requirements.
TYPICAL APPLICATIONS
Chemical equipment
Mechanical parts used in the condition of corrosion resistance
Bolt and nut
Pressure vessel
Heat treatment is only suitable for specific grades of stainless steel. When heat treating a stainless the hardening temperatures, including rate of heating, cooling and soaking times will vary due to several factors such as the shape and size of each component. Other considerations during the heat treatment process include the type of furnace, quenching medium and work piece transfer facilities. Please consult with the heat treatment provider for whole guidance on heat treatment of stainless steel grades. We are delighted to help to work with you the special heat treatment based on your special requirements.
TYPICAL APPLICATIONS
Chemical equipment
Mechanical parts used in the condition of corrosion resistance
Bolt and nut
Pressure vessel
TECHNICAL SALES ASSISTANCE
If you meet further on any technical enquiry, pleased to EMAIL our resident team of qualified production engineers, Email us: sales@ccsteels.com
If you meet further on any technical enquiry, pleased to EMAIL our resident team of qualified production engineers, Email us: sales@ccsteels.com
PRODUCT PROFILE & DIMENSIONS
Round bar / Wire rod (Diameter): 5.5mm to 450mm
Square bar / Flat bar: 3mm to 800mm
Length: Fixed length or random length or based on the customer's special requirement.
Round bar / Wire rod (Diameter): 5.5mm to 450mm
Square bar / Flat bar: 3mm to 800mm
Length: Fixed length or random length or based on the customer's special requirement.
Heavy/middle plate via hot rolled: T6 - 200mm X W1000- 2500mm X L1000-12000mm
Sheet steel via cold rolled: T0.5 - 6mm X W600- 1000mm X L1000 - 2000mm
Steel strip via cold rolled: T0.1 - 3mm X W5 - 200mm X L (or in coil form)
Forging piece: stepped shafts with flanks / discs /tubes /slugs /donuts /cubes /other different shapes based on OEM.
Sheet steel via cold rolled: T0.5 - 6mm X W600- 1000mm X L1000 - 2000mm
Steel strip via cold rolled: T0.1 - 3mm X W5 - 200mm X L (or in coil form)
Forging piece: stepped shafts with flanks / discs /tubes /slugs /donuts /cubes /other different shapes based on OEM.
