ASTM 301 Stockist, ASTM 301 Equivalent Datasheet

ASTM 301
2014-09-19 11:30:51   Origin:   Remark:0 Click:

ASTM 301 Specifications, ASTM 301 Datasheet, ASTM 301 Manufacturers, ASTM 301 Bar Forging Ex-stock & Plate Heat treatment Machined, Rod Exporters Ex-stock Sale - Technical standards - ASTM A276 - 2018.or by agreement.
ASTM 301 & UNS S30100 - DATA SHEET
MATERIAL CATEGORY:  17Cr-7Ni Austenitic steel 
PRODUCT DESCRIPTION
The alloy is usually produced by AOD / VD / VIM followed by electroslag refining (ESR) / VAR if necessary for special purpose.
Bars and, where applicable, forgings are subjected to ultrasonic examination based on the different levels according to the buyers' requirements.
Bars are usually supplied black/bright in the softened condition.
Final heat treatment - solution treatment / QT 
MATERIAL SPECIFICATIONS  
ASTM A959 (2004), A276, A312, A632, A176, A580
AVAILABILITY  
Black bar /Flat bar / steel strip / square bar  
Bright - peeled + polishing, centerless grinding
Forged - ring, tube, pipe casing, discs, shaft
CHEMICAL COMPOSITION (WEIGHT %) -  ASTM 301
Form: Plate,sheet, strip
Tensile strength, σb/MPa: 515
Yield strength, σ0.2/MPa: 205
Elongation, δ(%): 40
Reduction of area, ф (%):  -
Hardness (HBW):  217
Hardness | HRB: 95  
Cold bending property: N
 
HEAT TREATMENT PRACTICE
Heat treatment is only suitable for specific grades of
stainless steel. When heat treating a stainless the hardening temperatures, including rate of heating, cooling and soaking times will vary due to several factors such as the shape and size of each component. Other considerations during the heat treatment process include the type of furnace, quenching medium and work piece transfer facilities. Please consult with the heat treatment provider for whole guidance on heat treatment of stainless steel grades. We are delighted to help to work with you the special heat treatment based on your special requirements. 
TYPICAL APPLICATIONS 
Chemical equipment
Mechanical parts used in the condition of corrosion resistance 
Bolt and nut
Pressure vessel
TECHNICAL SALES ASSISTANCE  
If you meet further on any technical enquiry. pleased to EMAIL us or call our resident team of qualified production engineers, Email: sales@ccsteels.com
PRODUCT PROFILE
Round bar / Wire rod (Diameter): 5.5mm to 600mm
Square bar / Flat bar: 3mm to 1000mm
Plate / Sheet steel / Steel strip: 0.1mm to 1000mm
Width: 8mm to 1000mm
Length: random length or based on the customer's special requirement.
Forged steel shape: stepped shafts with flanks / discs /tubes /slugs /donuts /cubes /other different shapes based on OEM.  

Hot search:ASTM 301

Previous page:18Mn18Cr
Last page:S30100

Share to: