Nonmagnetic steel X8CrMnN18-18, 1.3816
2026-08-21 16:20:00 Origin： Remark：0 Click：
DIN SEW 390 material specifications X8CrMnN18-18 nonmagnetic, ring, flat bar 1.3816 round bar, hot forged & rolled, heat treated, cold expanded
TECHNICAL DATA SHEET - X8CrMnN18-18 & 1.3816
Technical specification: DIN SEW 390 (1991)
Stock available: round bar, forged blank
Typical chemical elements (mass fraction - %)
Carbon, C (％): ≤ 0.12
Silicon, Si (％): ≤ 1.00
Manganese, Mn (％): 17.5 ~ 20.0
Phosphorus, P (％): ≤ 0.060
Sulfur, S (％): ≤ 0.030
Chromium, Cr (％): 17.5 ~ 20.0
Silicon, Si (％): ≤ 1.00
Manganese, Mn (％): 17.5 ~ 20.0
Phosphorus, P (％): ≤ 0.060
Sulfur, S (％): ≤ 0.030
Chromium, Cr (％): 17.5 ~ 20.0
Nickel, Ni (％): ≤ 1.00
Molybdenum, Mo (％): -
Nitrogen, N (％): 0.45 ~ 0.80
Molybdenum, Mo (％): -
Nitrogen, N (％): 0.45 ~ 0.80
Aluminum, Al (%): ≤ 0.04
Vanadium, V (%): ≤ 0.25
Titanium, Ti (%): ≤ 0.10
HOT WORKING, HEAT TREATMENT, MECHANICAL PROPERTIES
Hot working temperature: 1150 ~ 950 degree centigrade
Quenching or solution treatment temperature: 1020 ~ 1120 degree centigrade, water cooled
Tensile strength, σb: 750 ~ 950 MPa
Yield strength, σ0.2: 480 MPa Min.
Elongation, δ5: 40.0% Min.
Impact strength at RM temp., Akv: 200 J (transversal value)
Yield strength, σ0.2: 480 MPa Min.
Elongation, δ5: 40.0% Min.
Impact strength at RM temp., Akv: 200 J (transversal value)
PRODUCT DESCRIPTION
X8MnCrN18.18 alloy is usually produced by AOD / BEF / EAF followed by electroslag refining (ESR) / VAR if necessary for special purpose. Bars and, where applicable, forgings are subjected to ultrasonic examination based on the different levels according to the buyers' requirements.
Bars are usually supplied bright in the annealed condition.
Final heat treatment - solution annealing treated, cold worked.
X8MnCrN18.18 alloy is usually produced by AOD / BEF / EAF followed by electroslag refining (ESR) / VAR if necessary for special purpose. Bars and, where applicable, forgings are subjected to ultrasonic examination based on the different levels according to the buyers' requirements.
Bars are usually supplied bright in the annealed condition.
Final heat treatment - solution annealing treated, cold worked.
PROFILES AND DIMENSIONS
Round bar, rod, disc (diameter): 6.0 to 850 mm
Square bar, flat bar: 10 to 600 mm
Round bar, rod, disc (diameter): 6.0 to 850 mm
Square bar, flat bar: 10 to 600 mm
Length: random length or based on the customer's special requirement.
Forged ringer: OD100 ~ 1500 X ID80 ~ 1200mm X Height 40 ~ 1200 mm
TECHNICAL SALES ASSISTANCE
If you meet further on any technical enquiry, pleased to EMAIL our resident team of qualified production engineers - E-mail: sales@ccsteels.com
If you meet further on any technical enquiry, pleased to EMAIL our resident team of qualified production engineers - E-mail: sales@ccsteels.com
Hot search：
