S66286
2014-09-26 14:29:34 Origin： Remark：0 Click：
Description S66286 Datasheet, Inventory S66286 Chemical, Suppliers S66286 Properties from Steelmaking, Blooming, Hot forging, Hot rolling, Heat treatment, Straightening, 100% Ultrasonic flaw detection test, Cold working or Machined. All of these materials conform to Military standard, nuclear power. 100% Ultrasonic test ASTM E2375 /SAE AMS 2154 /SEP 1923 /GB/T 4162 /EN 10228-3.
MATERIAL DATA SHEET - UNS S66286
MATERIAL SPECIFICATIONS - ASTM A959 (2004), A276, A312, A632, A176, A580
CHEMICAL COMPOSITION (WEIGHT %)
C (％): ≤ 0.08
Si (％): ≤ 1.00
Mn (％): ≤ 2.00
P (％)≤: 0.040
S (％)≤: 0.030
Cr (％): 13.5 ~ 16.0
Ni (％): 24.0 ~ 27.0
Mo (％): 1.00 ~ 1.50
Si (％): ≤ 1.00
Mn (％): ≤ 2.00
P (％)≤: 0.040
S (％)≤: 0.030
Cr (％): 13.5 ~ 16.0
Ni (％): 24.0 ~ 27.0
Mo (％): 1.00 ~ 1.50
Ti (％): 1.90 ~ 2.35
V (%): 0.10 ~ 0.50
B (%): 0.001 ~ 0.010
Others (%): Al ≤0.35
MECHANICAL PROPERTIES FINAL HEAT TREATMENT
| Test Temperature | Yield 0.2% | Yield 0.2% | Yield 0.2% | Yield 0.2% | Tensile Strength | % Elongation in 2" {50.8mm} | % Reduction of Area | |
|---|---|---|---|---|---|---|---|---|
| 0.2% offset | 0.2% offset | |||||||
| f/c | ksi | mpa | ksi | Mpa | ksi | Mpa | ||
| 70/21 | 90 | 621 | 92 | 655 | 145 | 1000 | 24 | 45 |
| 400/204 | 76 | 524 | 93 | 645 | 143 | 986 | 21 | 52 |
| 800/427 | 72 | 496 | 93 | 641 | 138 | 951 | 19 | 35 |
| 1000/538 | 62 | 427 | 87 | 603 | 131 | 903 | 18 | 31 |
| 1100/593 | 64 | 445 | 90 | 621 | 122 | 841 | 21 | 23 |
| 1200/649 | 62 | 431 | 88 | 607 | 103 | 713 | 13 | 14 |
| 1300/704 | 68 | 472 | 86 | 593 | 86 | 595 | 11 | 10 |
| 1400/760 | 44 | 307 | 62 | 427 | 64 | 441 | 18 | 23 |
| 1500/816 | ||||||||
HEAT TREATMENT PRACTICE
Heat treatment is only suitable for specific grades of stainless steel. When heat treating a stainless the hardening temperatures, including rate of heating, cooling and soaking times will vary due to several factors such as the shape and size of each component. Other considerations during the heat treatment process include the type of furnace, quenching medium and work piece transfer facilities. Please consult with the heat treatment provider for whole guidance on heat treatment of stainless steel grades. We are delighted to help to work with you the special heat treatment based on your special requirements.
PRODUCT DESCRIPTION
The alloy is usually produced by AOD / VOD / VIM followed by electroslag refining (ESR) / VAR if necessary for special purpose.
Bars and, where applicable, forgings are subjected to ultrasonic examination based on the different levels according to the buyers' requirements.
Bars are usually supplied black/bright in the softened condition.
Final heat treatment - solution treatment / QT
The alloy is usually produced by AOD / VOD / VIM followed by electroslag refining (ESR) / VAR if necessary for special purpose.
Bars and, where applicable, forgings are subjected to ultrasonic examination based on the different levels according to the buyers' requirements.
Bars are usually supplied black/bright in the softened condition.
Final heat treatment - solution treatment / QT
AVAILABILITY
Round bar / flat bar / steel strip / hollow bar / ring / forgings
Bright - peeled + polishing, centerless grinding
Forged - ring, tube, pipe casing, discs, shaft
Round bar / flat bar / steel strip / hollow bar / ring / forgings
Bright - peeled + polishing, centerless grinding
Forged - ring, tube, pipe casing, discs, shaft
PRODUCT PROFILE & DIMENSIONS
Round bar / Wire rod (Diameter): 5.5mm to 450mm
Square bar / Flat bar: 3mm to 1000mm
Plate / Sheet steel / Steel strip: 0.1mm to 1000mm
Width: 8mm to 1000mm
Length: random length or based on the customer's special requirement.
Forged steel shape: stepped shafts with flanks / discs /tubes /slugs /donuts /cubes /other different shapes based on OEM.
Round bar / Wire rod (Diameter): 5.5mm to 450mm
Square bar / Flat bar: 3mm to 1000mm
Plate / Sheet steel / Steel strip: 0.1mm to 1000mm
Width: 8mm to 1000mm
Length: random length or based on the customer's special requirement.
Forged steel shape: stepped shafts with flanks / discs /tubes /slugs /donuts /cubes /other different shapes based on OEM.
TYPICAL APPLICATIONS
Chemical equipment
Mechanical parts used in the condition of corrosion resistance
Bolts and nuts
Pressure vessel
Chemical equipment
Mechanical parts used in the condition of corrosion resistance
Bolts and nuts
Pressure vessel
TECHNICAL SALES ASSISTANCE
If you meet further on any technical enquiry, pleased to EMAIL our resident team of qualified production engineers, Email: sales@ccsteels.com
If you meet further on any technical enquiry, pleased to EMAIL our resident team of qualified production engineers, Email: sales@ccsteels.com
Hot search：S66286
