X22CrMoNiS13-1
2026-04-08 09:30:00 Origin： Remark：0 Click：
Technical specifications NF FD A35-570 -1996 stainless steel X22CrMoNiS13-1 round bar, flat bar, forgings, properties from steelmaking, ESR melting, hot bloomed, forged, rolled, heat treated
TECHNICAL DATA SHEET - NF X22CrMoNiS13-1
Official test certificate: issued by TUV - SGS - BV
Material category: stainless steel flat or plate
Technical standards - NF FD A35-570 - 96
Typical chemical compositions (mass weight - %)
C (％): 0.20 ~ 0.25
Si (％): ≤ 1.00
Manganese, Mn (％): ≤ 1.50
Phosphorus, P (％): ≤ 0.040
Sulfur, S (％): ≤ 0.15 ~ 0.25
Chromium, Cr (％): 12.0 ~ 14.0
Phosphorus, P (％): ≤ 0.040
Sulfur, S (％): ≤ 0.15 ~ 0.25
Chromium, Cr (％): 12.0 ~ 14.0
Molybdenum, Mo (％): 1.00 ~ 1.50
Nickel, Ni (%): 0.80 ~ 1.20
MECHANICAL PROPERTIES UNDER ROOM TEMP.
Tensile strength, σb ≥ MPa: 885
Yield strength, σ0.2 ≥ MPa: 685
Elongation, δ5 ≥ (％): 15.0
Yield strength, σ0.2 ≥ MPa: 685
Elongation, δ5 ≥ (％): 15.0
Reduction of area, Z (%): 50.0
Annealed hardness, HB ≤: -
PRODUCT DESCRIPTION
The alloy is usually produced by AOD / EF / EAF followed by electroslag refining (ESR) / VAR if necessary for special purpose.
Bars and, where applicable, forgings are subjected to ultrasonic examination based on the different levels according to the buyers' requirements.
Bars are usually supplied black/bright in the annealed condition.
Final heat treatment - quenched and tempered thermal treatment
PROFILE AND DIMENSIONS
The alloy is usually produced by AOD / EF / EAF followed by electroslag refining (ESR) / VAR if necessary for special purpose.
Bars and, where applicable, forgings are subjected to ultrasonic examination based on the different levels according to the buyers' requirements.
Bars are usually supplied black/bright in the annealed condition.
Final heat treatment - quenched and tempered thermal treatment
PROFILE AND DIMENSIONS
Round bar (diameter): 6.0 to 550 mm
Square bar / flat bar: T3.0 to 500 X W10 ~ 1200 mm
Length: random length or based on the customer's special requirement.
Heavy/middle plate via hot rolled: T3.0 - 200mm X W1000 - 1200mm X L1000-12000mm
Square bar / flat bar: T3.0 to 500 X W10 ~ 1200 mm
Length: random length or based on the customer's special requirement.
Heavy/middle plate via hot rolled: T3.0 - 200mm X W1000 - 1200mm X L1000-12000mm
TECHNICAL SALES ASSISTANCE
If you meet further on any technical enquiry or help, you can do EMAIL our qualified production engineers, E-mail: sales@ccsteels.com
If you meet further on any technical enquiry or help, you can do EMAIL our qualified production engineers, E-mail: sales@ccsteels.com
Hot search：X22CrMoNiS13-1
Total list
Monthly rank
- 21ASTM A565 type 616HT
- 18X8CrMnN20-10
- 142Cr11NiMoNbVN
- 132Cr20Mn9Ni2Si2N
- 13X66Cr13
- 13SUH310
- 13AM-350
- 13S42035
- 13ASTM A693 Gr. XM-16
- 12AISI 501