SAE 51416
2022-06-24 11:37:25 Origin： Remark：0 Click：
Round bars SAE 51416 Stock list, Flat bars SAE 51416 Ex-stock, Steel coil SAE 51416 Inventory Wire rod from Steel melting (ESR refined), Blooming, Hot forging, Hot rolling, Heat treatment, Straightening, 100% Ultrasonic flaw detection test, Cold working or Machined. All of these materials conform to Military standard, nuclear power. 100% Ultrasonic test ASTM E2375 /SAE AMS 2154 /SEP 1923 /GB/T 4162 /EN 10228-3.
RAW MATERIAL SPECIFICATIONS - Grade SAE 51416
Material Category - Aerospace Material Steel Series
Techncial Specifications - AMS 5610M
Special Melting Process - EAF
HS Code for Customs - 72221100 / 72221900 / 72223000
Stocklist on hand - Round bar diam.10mm ~ 220mm
Official Test Report - issued by TUV - SGS - BV
Chemical compositions (Mass Weight - %)
C (％): ≤ 0.15
Si (％): ≤ 1.00
Mn (％): ≤ 2.50
P (％) ≤: 0.050
S (％) ≤: 0.15 ~ 0.40
Cr (％): 11.5 ~ 13.5
Ni (％): ≤ 0.75
Mo (%): ≤ 0.60
Cu (%): ≤ 0.500
MECHANICAL PROPERTIES UNDER ROOM TEMP.
Form: plate, strip, sheet and forgings
Heat treatment condition: 996 °C ± 6 ℃
Tensile strength, σb/MPa: 650 ~ 850
Yield strength, σ0.2/MPa: 450 min.
Elongation, δ(％): 12.0 min.
Reduction of area, ф (％): 40.0
Hardness | HRW: -
SHAPES & DIMENSIONS
Round bar: 5.5mm to 400mm
Square bar / Flat bar: 10mm to 550mm
Wire rod: 1.0mm to 13.0mm
Steel strip: THK0.5 ~ 3.0mm, Width 8 ~ 220mm
Length: Fixed length or random length or based on the customer's special requirement.
TECHNICAL SALES ASSISTANCE
If you meet further on any technical enquiry or help, pleased to EMAIL our resident team of qualified production engineers. E-mail: sales@ccsteels.com.
Total list
Monthly rank
- 33ASTM A565 Gr.616HT
- 26EN 57
- 26P550
- 25ASTM A890 Grade 4A
- 24AISI 306
- 22ASTM A638 Gr.660
- 19E-Z6NCT25
- 19SAE 51420
- 18ASTM A538 / AMS 6514
- 15GTD 450
