1Cr12Ni2W1Mo1V
2025-11-03 11:30:00 Origin： Remark：0 Click：
Heat resistant steel 1Cr12Ni2W1Mo1V peeled round bar, heat treated flat bar 1Cr12Ni2W1Mo1V ESR, Forgings properties hot bloomed, UT, forged, rolled
TECHNICAL DATA SHEET - GB 1Cr12Ni2W1Mo1V & 851
OFFICIAL TEST CERTIFICATE: issued by TUV - SGS - BV
MATERIAL CATEGORY: Heat resisting Steel for Turbine blade
MATERIAL CATEGORY: Heat resisting Steel for Turbine blade
Technical standards: GB/T 20878-2007 & GB/T 8732 - 2014
Typical chemical compositions (mass weight %)
Carbon, C (％): 0.11 ~ 0.16
Silicon, Si (％): 0.10 ~ 0.35
Typical chemical compositions (mass weight %)
Carbon, C (％): 0.11 ~ 0.16
Silicon, Si (％): 0.10 ~ 0.35
Manganese, Mn (％): 0.40 ~ 0.80
Phosphorus, P (％): ≤ 0.025
Sulfur, S (％): ≤ 0.020
Chromium, Cr (％): 10.5 ~ 12.5
Phosphorus, P (％): ≤ 0.025
Sulfur, S (％): ≤ 0.020
Chromium, Cr (％): 10.5 ~ 12.5
Molybdenum, Mo (％): 1.00 ~ 1.40
Nickel, Ni (%): 2.20 ~ 2.50
Vanadium, V (%): 0.15 ~ 0.35
Tungsten, W (%): 1.00 ~ 1.40
Aluminum, Al (%): ≤ 0.05
MECHANICAL PROPERTIES UNDER ROOM TEMP.
Tensile strength, Rm ≥ MPa: 920
Yield strength, Rp0.2≥ MPa: 735
Elongation, A5 ≥(％): 13.0
Yield strength, Rp0.2≥ MPa: 735
Elongation, A5 ≥(％): 13.0
Reduction of area, Z (%): 40.0
Impact strength, AKv / J ≥: 48
QT hardness, HB: 277 ~ 331
PRODUCT DESCRIPTION
The alloy is usually produced by AOD / EF / EAF followed by electroslag refining (ESR) / VAR if necessary for special purpose. Bars and, where applicable, forgings are subjected to ultrasonic examination based on the different levels according to the buyers' requirements.
Bars are usually supplied bright in the annealed condition.
Final heat treatment - quenched and tempered, SRA.
The alloy is usually produced by AOD / EF / EAF followed by electroslag refining (ESR) / VAR if necessary for special purpose. Bars and, where applicable, forgings are subjected to ultrasonic examination based on the different levels according to the buyers' requirements.
Bars are usually supplied bright in the annealed condition.
Final heat treatment - quenched and tempered, SRA.
ADVANTAGED STOCK
High alloy and superalloy for turbine blade:
ASTM A565 Grade 616/422/S42200, Grade 615/S41800, XM-32/S64152.
17-4PH/630/1.4542, 631, 851, 961, WB36, D6AC, D6A..
1.4980, 1.4922, 1.4923, 1.4935, 1.4938, 1.4913.
Forms: Bars, Forge piece, Ring, Strip.
Non-magnetic alloy.
X40MnCrN19/1.3813, X8CrMnN18-18/1.3816, X40MnCr18/1.3817, N1310.
Forms: Bars, Forge piece, Ring, Strip.
TECHNICAL SALES ASSISTANCE
If you meet further on any technical enquiry, you can do as follows:
EMAIL our qualified production engineers.
If you meet further on any technical enquiry, you can do as follows:
EMAIL our qualified production engineers.
E-mail: sales@ccsteels.com
Hot search：1Cr12Ni2W1Mo1V
Previous page：665H20 / AISI 4620
Last page：1Cr12Ni2WMoVNb
Total list
Monthly rank
- 34Z10CNT18-11
- 28ASTM A638 Gr.660
- 2118Cr-18Mn
- 17EN 57
- 14Z50NMC12
- 14Z9CNDA15-07
- 13FV520B / FV520
- 13P550
- 12ASTM A565 Grade 616
- 12FV535