K94610 datasheet,K94610 chemical,K94610 heat treatment

K94610
2019-04-09 10:32:03   Origin:   Remark:0 Click:

Material technical specifications of High temperature alloy steels for internal combustion engine K94610 datasheet,UNS K94610 Chemical compositions, UNS K94610 mechanical properties from Steelmaking, ESR melting, Hot blooming, 100% UT, Hot forging, Hot rolling, Heat treatment, Straightening, 100% Ultrasonic test, Cold working or Machined. Technical specifications - ISO / TR 4956 - 1984.

TECHNICAL DATA SHEET - K94610


OFFICIAL TEST CERTIFICATE: issued by TUV - SGS BV
MATERIAL CATEGORY: High temperature alloy steel for internal combustion engine Nickel-iron-cobalt alloy
MATERIAL SPECIFICATIONS: ISO / TR 4956 - 1984
CHEMICAL COMPOSITION (WEIGHT %)
C (%):     ≤ 0.05
Si (%):     ≤ 0.20
Mn (%):   ≤ 0.50
P (%)≤:   0.020
S (%)≤:   0.010
Cr (%):    ≤  0.20
Ni (%):     28.0 ~ 30.0
Co (%):   17.0 ~ 18.0
Mo (%):   ≤ 0.20
Cu (%):    ≤ 0.20
Fe (%):     Balance
MECHANICAL PROPERTIES UNDER ROOM TEMP.  
Condition of heat treatment: Quenched and tempered annealed
Tensile strength, σb ≥/MPa: 520
Yield strength, σ0.2 ≥/MPa: 337
Elontation, δ ≥(%): 42.0
Reduction of area, ф ≥(%): -
Hardness | HBW: - 
PRODUCT DESCRIPTION
The alloy is usually produced by BEF & AOD followed by electroslag remelting (ESR) / VAR if necessary for special purpose.
Bars and, where applicable, forgings are subjected to ultrasonic examination based on the different levels according to the buyers' requirements.
Bars are usually supplied black/bright in the annealed condition.
FORMS AND SHAPES
Round bar (Diameter): 5.50 ~ 650mm
Square bar / Flat bar: 3 ~ 650mm
Wire rod (Diameter): 0.10 ~ 16mm
Steel strip via cold rolled: T0.1 - 3mm X W5 - 650mm X L (or in coil form)
Forging piece: Different shapes based on OEM.

Hot search:K94610

Previous page:X17CrMoVNbB9-1
Last page:2.4650 / Alloy C-263 / N07263

Share to: