12-2W & S41800
2019-06-10 17:05:46 Origin： Remark：0 Click：
ASTM A565 Martensitic Stainless Steel S41800 Strip, Round bar, Forgings S41800 Hot forging / rolling, Heat treatment, Cold working or machined.
TECHNICAL DATASHEET - Grade S41800 & 12-2W
OFFICIAL TEST CERTIFICATE - issued by TUV - SGS - BV
MATERIAL CATEGORY - American high temperature alloys
HS Code For Customs - 72202020 / 72202030
Inventory & Stocklist - Steel strip 0.75 X 200mm
Inventory & Stocklist - Steel strip 0.75 X 200mm
CHEMICAL COMPOSITION (mass weight %)
Carbon, C (％): 0.15 ~ 0.20
Silicon, Si (％): ≤ 0.50
Manganese, Mn (％): ≤ 0.50
Phosphorus, P (％)≤: 0.025
Sulfur, S (％)≤: 0.010
Chromium, Cr (％): 12.0 ~ 14.0
Nickel, Ni (％): 1.75 ~ 2.25
Molybdenum, Mo (％): ≤ 0.50
Silicon, Si (％): ≤ 0.50
Manganese, Mn (％): ≤ 0.50
Phosphorus, P (％)≤: 0.025
Sulfur, S (％)≤: 0.010
Chromium, Cr (％): 12.0 ~ 14.0
Nickel, Ni (％): 1.75 ~ 2.25
Molybdenum, Mo (％): ≤ 0.50
Tungsten, W (%): 2.50 ~ 3.50
Aluminum, Al (%): -
MECHANICAL PROPERTIES UNDER ROOM TEMPERATURE
Tensile strength, σb/≥ MPa: 965
Yield strength, σ0.2/≥ MPa: 760
Elongation, δ ≥(％): 15.0
Elongation, δ ≥(％): 15.0
Reduction of area, ф ≥ (％): -
Hardness | HRB: 302 ~ 352
PRODUCT FORMS AND DIMENSIONS
Round bar (Diameter): 5.5mm to 650mm
Square bar / flat bar: 10mm to 500mm
Heavy/middle plate via hot rolled: T60 - 400mm X W100 - 1200mm X L1000 ~ 5000mm
Sheet steel via cold rolled: T0.5 - 3mm X W100 - 800mm X L1000 - 2000mm
Steel strip via cold rolled: T0.1 - 3mm X W5 - 200mm X L (or in coil form)
Forging piece: stepped shafts, other different shapes based on OEM.
Square bar / flat bar: 10mm to 500mm
Heavy/middle plate via hot rolled: T60 - 400mm X W100 - 1200mm X L1000 ~ 5000mm
Sheet steel via cold rolled: T0.5 - 3mm X W100 - 800mm X L1000 - 2000mm
Steel strip via cold rolled: T0.1 - 3mm X W5 - 200mm X L (or in coil form)
Forging piece: stepped shafts, other different shapes based on OEM.
TECHNICAL SALES ASSISTANCE
If you meet further on any technical enquiry, pleased to EMAIL (sales@ccsteels.com) our resident team of qualified production engineers.
If you meet further on any technical enquiry, pleased to EMAIL (sales@ccsteels.com) our resident team of qualified production engineers.
Previous page：Inconel 600
Last page：Inconel 601
