Nitronic 32 & XM-28
2015-07-02 09:34:02 Origin： Remark：0 Click：
TECHNICAL DATA SHEET - Grade Nitronic 32 & XM-28
Si (％): ≤ 1.00
Mn (％): 11.0 ~ 14.0
P (％)≤: 0.060
S (％)≤: 0.030
Cr (％): 16.5 ~ 19.5
Ni (％): 0.50 ~ 2.50
Mo (％): -
N (％): 0.20 ~ O.45
Elongation, δ (％): 50 min.
Reduction of area, ф (％): 70.0
The alloy is usually produced by AOD / VOD /VIM followed by electroslag refining (ESR) / VAR if necessary for special purpose.
Bars and, where applicable, forgings are subjected to ultrasonic examination based on the different levels according to the buyers' requirements.
Bars are usually supplied black/bright in the annealed condition.
Final heat treatment - solution treatment
Round bar / Wire rod (Diameter1): 5.5mm to 600mm
Square bar / Flat bar: 3mm to 800mm
Length: Fixed length or random length or based on the customer's special requirement.
Forging piece: stepped shafts with flanks / discs /tubes /slugs /donuts /cubes /other different shapes based on OEM.
Heat treatment is only suitable for specific grades of stainless steel. When heat treating a stainless the hardening temperatures, including rate of heating, cooling and soaking times will vary due to several factors such as the shape and size of each component. Other considerations during the heat treatment process include the type of furnace, quenching medium and work piece transfer facilities. Please consult with the heat treatment provider for whole guidance on heat treatment of stainless steel grades. We are delighted to help to work with you the special heat treatment based on your special requirements.
TECHNICAL SALES ASSISTANCE
If you meet further on any technical enquiry. pleased to EMAIL our resident team of qualified production engineers. E-mail: firstname.lastname@example.org