Z6CNU17-04
2019-11-02 15:50:38 Origin： Remark：0 Click：
Martensitic ageing steel Z6CNU17-04 Round bar, flat bar, plate Z6CNU17-04 Inventory Produced from Steelmaking, ESR melting, Hot forging / rolling, Heat treatment, Cold working or Machined.
TECHNICAL DATA SHEET - Grade AFNOR Z6CNU17-04
OFFICIAL TEST CERTIFICATE - issued by TUV - SGS - BV
MATERIAL CATEGORY - Hot rolled stainless steel round bar and wire rod
Technical standards - NF A35-574 - 1990
MATERIAL CATEGORY - Hot rolled stainless steel round bar and wire rod
Technical standards - NF A35-574 - 1990
Customs HS Code - 72221100 / 72221900
Stocklist & Inventory - Diameter 10mm ~ 200mm
CHEMICAL COMPOSITION (mass weight - %)
Carbon, C (％): ≤ 0.07
Silicon, Si (％): ≤ 0.75
Carbon, C (％): ≤ 0.07
Silicon, Si (％): ≤ 0.75
Manganese, Mn (％): ≤ 2.00
Phosphorus, P (％)≤: 0.035
Sulfur, S (％)≤: 0.020
Chromium, Cr (％): 15.0 ~ 17.5
Sulfur, S (％)≤: 0.020
Chromium, Cr (％): 15.0 ~ 17.5
Nickel, Ni (%): 3.00 ~ 5.00
Molybdenum, Mo (％): ≤ 0.50
Copper, Cu (%): 3.00 ~ 5.00
Nb + Ta (%): 0.15 ~ 0.45
MECHANICAL PROPERTIES UNDER ROOM TEMP.
Condition: solution annealed + Aged H1050
Tensile strength, TS, σb/≥ MPa: 950 ~ 1150
Yield strength, YS, σ0.2/≥ MPa: 800
Elongation, EL, δ ≥(％): 10.0
Yield strength, YS, σ0.2/≥ MPa: 800
Elongation, EL, δ ≥(％): 10.0
Reduction of area, RA, (%): -
Annealed hardness, HB ≤: 365
PRODUCT PROFILE AND AVAILABLE FORMS
Round bar (Diameter): 5.50mm to 650mm
Square bar / Flat bar: T3 to 500mm X W3 ~ 1000mm
Round bar (Diameter): 5.50mm to 650mm
Square bar / Flat bar: T3 to 500mm X W3 ~ 1000mm
Wire rod (Diameter): 0.50mm to 16mm
Strip or Coil: T0.20~3.0 X W8.0~650mm
Length: Fixed length or random length or based on the customer's special requirement.
Length: Fixed length or random length or based on the customer's special requirement.
Other different shapes based on OEM.
TECHNICAL SALES ASSISTANCE
If you meet further on any technical enquiry, please EMAIL ( sales@ccsteels.com) our qualified production engineers.
If you meet further on any technical enquiry, please EMAIL ( sales@ccsteels.com) our qualified production engineers.
Hot search：Z6CNU17-04
Previous page：Z6CNU17-04
Last page：K11572
