AMS 5663 Stockist, AMS 5663 Equivalent Steel

AMS 5663
2020-01-09 10:05:22   Origin:   Remark:0 Click:

AMS 5663 Round bar, Inconel 718 instock, AMS 5663 made from Vacuum Melting, ESR & VAR Remelt, technique, Blooming, Hot forging, Hot rolling, Heat treatment, Straightening, 100% Ultrasonic flaw detection test,
TECHNICAL DATA SHEET - AMS 5663

TECHNICAL SPECIFICATION: AMS 5663
OFFICIAL TEST CERTIFICATE: issued by TUV - SGS -  BV
MATERIAL CATEGORY: Precipitation hardened and cold worked
nickel alloy
CHEMICAL COMPOSITION (mass weight %)
C (%):    ≤ 0.08
Si (%):    ≤ 0.35
Mn (%):  ≤ 0.35
P (%) ≤: 0.015
S (%) ≤: 0.015
Cr (%):   17.0 ~ 21.0
Co (%):   ≤ 1.00
Mo (%):  2.80 ~ 3.30
Nb/Ta (%): 4.75 ~ 5.50
Ti (%):    0.65 ~ 1.15
Al (%):    0.20 ~ 0.80
Zr (%):    -
B (%):     ≤ 0.006
Fe (%):   Remainder
Cu (%):   ≤ 0.30
Ni (%):    50.0 ~ 55.0
Ta (%):   -
Nb (%):   -
W (%):    -
MECHANICAL PROPERTIES UNDER ROOM TEMPERATURE
Condition: Solution + Stabilize + Precipitation harden
Heat treatment pratice: Solution treatment 924 ~ 1010 Deg. hold 1/2h min., cool at rate equivalent to air cool or faster
                                   Precipitation hardening treatment, 718+/-14 Deg, hold at temperature for 8h, furnace cool to 621+/-14 Deg., hold until total precipitation heat treatment time has reached 18h, air cool
Tensile strength,σb/≥ MPa: 1275
Yield strength, σ0.2/≥ MPa: 1034
Elongation, δ ≥(%): 12.0
Reduction of area, ф ≥ (%): 15.0
Hardness | HBW: 331 min.
STRESS RUPTURE REQUIREMENT
Test temperature: 649 Deg.
Stress /MPa: 690
Time to rupture: 23h
Elongtation, (%): 5.0

PRODUCT SHAPES & DIMENSIONS
Round bar (Diameter): 0.5mm to 550mm
Square bar / Flat bar: 10mm to 700mm
Forging piece: stepped shafts, and other different shapes based on OEM.
TECHNICAL SALES ASSISTANCE
If you meet further on any technical enquiry. pleased to EMAIL (
sales@ccsteels.com) our resident team of qualified production engineers.

Hot search:AMS 5663

Previous page:AMS 5663
Last page:Alloy 718

Share to: