ASTM A182 Gr.F6NM
2020-04-10 08:47:42 Origin: Remark:0 Click:
ASTM A182 Gr.F6NM Round bar, flat bar and plate Gr.F6NM Forging Ex-stock Sale - Technical standards - ASTM A182 - 2018.or by agreement.
TECHNICAL DATA SHEET - ASTM A182 Grade F6NM
MATERIAL TECHNICAL STANDARDS: ASTM A182 - 2018
Mn (%): 0.50 ~ 1.00
Si (%): ≤ 0.60
Si (%): ≤ 0.60
P (%)≤: 0.030
S (%)≤: 0.030
Cr (%): 11.5 ~ 14.0
Mo (%): 0.50 ~ 1.00
S (%)≤: 0.030
Cr (%): 11.5 ~ 14.0
Mo (%): 0.50 ~ 1.00
Ni (%): 3.50 ~ 5.50
Nb (%): -
Ti (%): -
MECHANICAL PROPERTY UNDER ROOM TEMP.
Tensile strength, σb/≥ MPa: 790
Yield strength, σ0.2/MPa: 620
Elongation, δ ≥(%): 15.0
Reduction of area, ф ≥ (%): 45.0
Hardness via heat treatment /HBW: 295 Max.
Reduction of area, ф ≥ (%): 45.0
Hardness via heat treatment /HBW: 295 Max.
HEAT TREATMENT PRACTICE
Condition: Quenching 1010 Deg.
Cooling medium: air cooling
Tempering temperature: 560 ~ 600 Deg.
PRODUCT DESCRIPTION
The alloy is usually produced by BEF & BEF + AOD & EAF + VD + LF, followed by electroslag refining (ESR or VAR ) if necessary for special purpose.
Bars and, where applicable, forgings are subjected to ultrasonic examination based on the different levels according to the buyers' specific requirements.
Round bar / Wire rod (Diameter): 5.50mm to 600mm
Square bar / Flat bar: 10mm to 800mm
Length: Fixed length or random length or based on the customer's special requirement.
Heavy/middle plate via hot rolled: T60 ~ 400mm X W60 ~ 1000mm X L1000 ~ 3500mm
Forging piece: stepped shafts, other different shapes based on OEM.
The alloy is usually produced by BEF & BEF + AOD & EAF + VD + LF, followed by electroslag refining (ESR or VAR ) if necessary for special purpose.
Bars and, where applicable, forgings are subjected to ultrasonic examination based on the different levels according to the buyers' specific requirements.
Round bar / Wire rod (Diameter): 5.50mm to 600mm
Square bar / Flat bar: 10mm to 800mm
Length: Fixed length or random length or based on the customer's special requirement.
Heavy/middle plate via hot rolled: T60 ~ 400mm X W60 ~ 1000mm X L1000 ~ 3500mm
Forging piece: stepped shafts, other different shapes based on OEM.
TECHNICAL SALES ASSISTANCE & SERVICE
If you meet further on any technical inquiry, pleased to E-mail (sales@ccsteels.com) our resident team of qualified production engineers.
If you meet further on any technical inquiry, pleased to E-mail (sales@ccsteels.com) our resident team of qualified production engineers.
Previous page:15CrMoV6
Last page:ASTM A182 Gr. S41500
Total list
Monthly rank
- 33ASTM A565 Gr.616HT
- 26EN 57
- 26P550
- 25ASTM A890 Grade 4A
- 24AISI 306
- 22ASTM A638 Gr.660
- 19E-Z6NCT25
- 19SAE 51420
- 18ASTM A538 / AMS 6514
- 15GTD 450