FXM-27Cb
2020-04-14 09:08:16 Origin： Remark：0 Click：
FXM-27Cb Specifications, Ex-stock FXM-27Cb Suppliers, FXM-27Cb Forging Bar & Plate Machined, Alloy FXM-27Cb Exporters Ex-stock Sale Technical standards ASTM A182 - 2018.or by agreement.
TECHNICAL DATA SHEET - ASTM A182 Grade FXM-27Cb
MATERIAL TECHNICAL STANDARDS: ASTM A182 - 2018
MATERIAL TYPE: Ferritic Stainless steel
CHEMICAL COMPOSITION (WEIGHT %)
C (％): ≤ 0.010
CHEMICAL COMPOSITION (WEIGHT %)
C (％): ≤ 0.010
Mn (％): ≤ 0.40
Si (％): ≤ 0.60
Si (％): ≤ 0.60
P (％)≤: 0.020
S (％)≤: 0.020
Cr (%): 25.0 ~ 27.5
Mo (%): 0.75 ~ 1.50
S (％)≤: 0.020
Cr (%): 25.0 ~ 27.5
Mo (%): 0.75 ~ 1.50
Ni (%): ≤ 0.50
Nb (%): 0.05 ~ 0.20
Cu (%): ≤ 0.20
N (%): ≤ 0.015
Ti (%): -
MECHANICAL PROPERTY UNDER ROOM TEMP.
Tensile strength, σb/≥ MPa: 415
Yield strength, σ0.2/MPa: 240
Elongation, δ ≥(％): 20.0
Reduction of area, ф ≥ (％): 45.0
Hardness via heat treatment /HBW: 190 Max.
Reduction of area, ф ≥ (％): 45.0
Hardness via heat treatment /HBW: 190 Max.
HEAT TREATMENT PRACTICE
Condition: annealing 1010 Deg.
Cooling medium: Furnace cooling
Tempering temperature: /
PRODUCT DESCRIPTION
The alloy is usually produced by BEF & BEF + AOD & EAF + VD + LF, followed by electroslag refining (ESR or VAR ) if necessary for special purpose.
Bars and, where applicable, forgings are subjected to ultrasonic examination based on the different levels according to the buyers' specific requirements.
Round bar / Wire rod (Diameter): 5.50mm to 600mm
Square bar / Flat bar: 10mm to 800mm
Length: Fixed length or random length or based on the customer's special requirement.
Heavy/middle plate via hot rolled: T60 ~ 400mm X W60 ~ 1000mm X L1000 ~ 3500mm
Forging piece: stepped shafts with flanks / discs /tubes /slugs /donuts /cubes /other different shapes based on OEM.
The alloy is usually produced by BEF & BEF + AOD & EAF + VD + LF, followed by electroslag refining (ESR or VAR ) if necessary for special purpose.
Bars and, where applicable, forgings are subjected to ultrasonic examination based on the different levels according to the buyers' specific requirements.
Round bar / Wire rod (Diameter): 5.50mm to 600mm
Square bar / Flat bar: 10mm to 800mm
Length: Fixed length or random length or based on the customer's special requirement.
Heavy/middle plate via hot rolled: T60 ~ 400mm X W60 ~ 1000mm X L1000 ~ 3500mm
Forging piece: stepped shafts with flanks / discs /tubes /slugs /donuts /cubes /other different shapes based on OEM.
TECHNICAL SALES ASSISTANCE & SERVICE
If you meet further on any technical inquiry, pleased to E-mail (sales@ccstels.com) our resident team of qualified production engineers.
If you meet further on any technical inquiry, pleased to E-mail (sales@ccstels.com) our resident team of qualified production engineers.
Hot search：FXM-27Cb
Previous page：AISI 418
Last page：ASTM A838 type 1
