R30003
2020-04-16 09:25:52 Origin： Remark：0 Click：
R30003 Specifications, UNS R30003 wire, R30003 Strip Coil machined, ESR & VAR Manufacturing technique, Hot blooming, Hot rolling, Cold rolled, Heat treatment, Straightening, 100% Ultrasonic flaw detection test
TECHNICAL DATA SHEET - Alloy UNS R30003
OFFICIAL TEST CERTIFICATE: issued by TUV - SGS - BV
CHEMICAL COMPOSITION (mass weight %)
C (％): ≤ 0.15
C (％): ≤ 0.15
Si (％): ≤ 1.00
Mn (％): 1.50 ~ 2.50
P (％)≤: 0.025
Mn (％): 1.50 ~ 2.50
P (％)≤: 0.025
S (％)≤: 0.015
Cr (％): 19.0 ~ 21.0
Cr (％): 19.0 ~ 21.0
Ni (％): 14.0 ~ 16.0
Mo (％): 6.00 ~ 8.00
Co (%): 39.0 ~ 41.0
Co (%): 39.0 ~ 41.0
W (%): 2.30 ~ 3.30
Al (%): -
Al (%): -
Cu (%): -
Ti (%): -
Ti (%): -
Fe (%): 11.0 ~ 20.5
Be (%): ≤ 0.10
TYPICAL MECHANICAL PROPERTIES
Tensile strength, σb/≥ MPa: 860
Yield strength, σ0.2/MPa: 520
Elongation, δ ≥(％): 30.0
Reduction of area, ф ≥ (％): -
Hardness via heat treatment /HBW: -
Reduction of area, ф ≥ (％): -
Hardness via heat treatment /HBW: -
TYPICAL APPLICATIONS
Superalloy is widely used to produce the high temperature components for gas turbine in the field of aviation, naval vessels and industry, such as turbine blade, guide blade, turbine disc, high pressure compressor disc, combustor, and also production of energy conversion devices, such as aerospace craft, rocket motor, nuclear reactor, petrochemical equipments, coaly transforming and so on. The alloy is usually produced by AOD / VD / VIM followed by electroslag refining (ESR) / VAR if necessary for special purpose.
Superalloy is widely used to produce the high temperature components for gas turbine in the field of aviation, naval vessels and industry, such as turbine blade, guide blade, turbine disc, high pressure compressor disc, combustor, and also production of energy conversion devices, such as aerospace craft, rocket motor, nuclear reactor, petrochemical equipments, coaly transforming and so on. The alloy is usually produced by AOD / VD / VIM followed by electroslag refining (ESR) / VAR if necessary for special purpose.
MATERIAL CATEGORY: Co- Cr - Ni Superalloy
Elgiloy (Co-Cr-Ni Alloy) is a "super-alloy" consisting of 39-41% Cobalt, 19-21% Chromium, 14-16% Nickel, 11.3-20.5% Iron, 6-8% Molybdenum, and 1.5-2.5% Manganese.
It is used to make springs that are corrosion resistant and exhibit high strength, ductility, and good fatigue life. Due to its chemical composition, Elgiloy is highly resistant to sulfide stress corrosion cracking and pitting, and can operate at temperatures up to 454°C.
It is used to make springs that are corrosion resistant and exhibit high strength, ductility, and good fatigue life. Due to its chemical composition, Elgiloy is highly resistant to sulfide stress corrosion cracking and pitting, and can operate at temperatures up to 454°C.
Round bar (Diameter): 5.50 ~ 450mm
Square bar / Flat bar: 3 ~ 350mm
Wire rod (Diameter): 0.10 ~ 10mm
Steel strip via cold rolled: T0.05 - 3mm X W5 - 650mm X L (or in coil form)
Forging piece: Different shapes based on OEM.
Steel strip via cold rolled: T0.05 - 3mm X W5 - 650mm X L (or in coil form)
Forging piece: Different shapes based on OEM.
Other sizes can be supplied to meet specific requirements.
TECHNICAL SALES ASSISTANCE
If you meet further on any technical enquiry, pleased to Email (sales@ccsteels.com) our qualified production engineers.
If you meet further on any technical enquiry, pleased to Email (sales@ccsteels.com) our qualified production engineers.
Hot search：R30003
