Aquamet 19
2025-09-08 11:53:00 Origin： Remark：0 Click：
Aquamet 19 Shaft, Stocklist Aquamet 19 Forged round bar, cold drawn shaft, Technical Specifications Melting, ESR & VAR technique, heat treated
MATERIAL DATA SHEET - Aquamet 19
OFFICIAL TEST CERTIFICATE: issued by TUV - SGS - BV
HS Code for Customs - 72221100 / 72221900 / 72223000
Stocklist on hand - Round bar diam.50mm ~ 180mm
MATERIAL CATEGORY: Special alloys for boat shaft
CHEMICAL COMPOSITIONS (mass fraction %)
Carbon, C (％): ≤ 0.08
Silicon, Si (％): ≤ 1.00
Manganese, Mn (％): ≤ 2.00
Phosphorus, P (％) ≤: 0.040
Sulfur, S (％) ≤: 0.030
Chromium, Cr (％): 18.0 ~ 20.0
CHEMICAL COMPOSITIONS (mass fraction %)
Carbon, C (％): ≤ 0.08
Silicon, Si (％): ≤ 1.00
Manganese, Mn (％): ≤ 2.00
Phosphorus, P (％) ≤: 0.040
Sulfur, S (％) ≤: 0.030
Chromium, Cr (％): 18.0 ~ 20.0
Nickel, Ni (％): 8.00 ~ 10.5
Molybdenum, Mo (％): -
Molybdenum, Mo (％): -
Copper, Cu (%): -
Nitrogen, N (%): 0.20 ~ 0.30
Nitrogen, N (%): 0.20 ~ 0.30
MECHANICAL PROPERTIES UNDER ROOM TEMP.
Tensile strength, σb ≥ MPa: 655
Yield strength, σ0.2 ≥ MPa: 345
Elonghation, δ5 ≥ (％): 25.0
Reduction of area, ф ≥ (％): 50.0
Hardness | HB:
AVAILABLE FORMS AND SHAPES
Round bar & shaft (diameter): 50 to 230mm
Square bar / flat bar: 10 to 650mm
Forging piece: different shapes based on OEM.
Yield strength, σ0.2 ≥ MPa: 345
Elonghation, δ5 ≥ (％): 25.0
Reduction of area, ф ≥ (％): 50.0
Hardness | HB:
AVAILABLE FORMS AND SHAPES
Round bar & shaft (diameter): 50 to 230mm
Square bar / flat bar: 10 to 650mm
Forging piece: different shapes based on OEM.
TECHNICAL SALES ASSISTANCE
If you meet further on any technical enquiry, pleased to EMAIL (sales@ccsteels.com) our qualified production engineers.
If you meet further on any technical enquiry, pleased to EMAIL (sales@ccsteels.com) our qualified production engineers.
Previous page：K13049
Last page：EN19B & EN 19
