ASTM A182 Gr.F347
2020-12-18 15:11:26 Origin： Remark：0 Click：
Specifications ASTM A182 Gr.F347 Chemical, ASTM A182 Gr.F347 Datasheet, Properties ASTM A182 Grade F347 Flat Bar Forging Ex-stock & Plate Heat treatment Machined, Rod Exporters Ex-stock Sale - Technical standards - ASTM A182 - 2018.or by agreement.
TECHNICAL DATA SHEET - ASTM A182 Grade F347
MATERIAL TECHNICAL STANDARDS - ASTM A182 - 2018
Mn (％): ≤ 2.00
Si (％): ≤ 1.00
Si (％): ≤ 1.00
P (％)≤: 0.030
S (％)≤: 0.010
Ni (%): 9.00 ~ 13.0
S (％)≤: 0.010
Ni (%): 9.00 ~ 13.0
Cr (%): 17.0 ~ 20.0
Mo (%): -
Nb (%): 10 X C ~ 1.10
N (%): -
MECHANICAL PROPERTY UNDER ROOM TEMP.
Tensile strength, σb/≥ MPa: 515
Yield strength, σ0.2/MPa: 205
Elongation, δ ≥(％): 30.0
Reduction of area, ф ≥ (％): 50.0
Hardness via heat treatment /HBW: -
Reduction of area, ф ≥ (％): 50.0
Hardness via heat treatment /HBW: -
HEAT TREATMENT PRACTICE
Condition: solution annealing
Cooling medium: water or oil cooling
Tempering temperature: 1010 ~ 1050 Deg.C
PRODUCT MELTING & AVAILABLE DIMENSIONS
The alloy is usually produced by BEF & BEF + AOD & EAF + VD + LF, followed by electroslag refining (ESR or VAR ) if necessary for special purpose.
Bars and, where applicable, forgings are subjected to ultrasonic examination based on the different levels according to the buyers' specific requirements.
Round bar / Wire rod (Diameter): 5.5mm ~ 500mm
Square bar / Flat bar: 10mm to 1000mm
Length: Fixed length or random length or based on the customer's special requirement.
Heavy/middle plate via hot rolled: T60 ~ 400mm X W60 ~ 1000mm X L1000 ~ 3500mm
Forging piece: stepped shafts with flanks / discs /tubes /slugs /donuts /cubes /other different shapes based on OEM.
The alloy is usually produced by BEF & BEF + AOD & EAF + VD + LF, followed by electroslag refining (ESR or VAR ) if necessary for special purpose.
Bars and, where applicable, forgings are subjected to ultrasonic examination based on the different levels according to the buyers' specific requirements.
Round bar / Wire rod (Diameter): 5.5mm ~ 500mm
Square bar / Flat bar: 10mm to 1000mm
Length: Fixed length or random length or based on the customer's special requirement.
Heavy/middle plate via hot rolled: T60 ~ 400mm X W60 ~ 1000mm X L1000 ~ 3500mm
Forging piece: stepped shafts with flanks / discs /tubes /slugs /donuts /cubes /other different shapes based on OEM.
TECHNICAL SALES ASSISTANCE & SERVICE
If you meet further on any technical inquiry, pleased to E-mail (sales@ccsteels.com) our resident team of qualified production engineers.
If you meet further on any technical inquiry, pleased to E-mail (sales@ccsteels.com) our resident team of qualified production engineers.
Previous page：ASTM A514 Gr.B
Last page：ASTM A514 Gr.H
