Z12CNDV12-02
2025-10-19 09:30:00 Origin： Remark：0 Click：
NF A35-578 material specification Z12CNDV12-02 round bar, flat bar, stock available 1.4938 forged, Hot rolled, 1010℃ quenched heat treated
TECHNICAL DATA SHEET - Z12CNDV12-02
OFFICIAL TEST CERTIFICATE: issued by TUV - SGS - BV
MATERIAL CATEGORY - heat resistant steel
TECHNICAL SPECIFICATIONS - NF A35-578 - 1991
TYPICAL CHEMICAL ELEMENTS (mass weight %)
Carbon, C (％): 0.08 ~ 0.15
Silicon, Si (％): ≤ 0.35
Manganese, Mn (％): 0.50 ~ 0.90
Phosphorus, P (％): ≤ 0.035
Sulfur, S (％): ≤ 0.015
Chromium, Cr (％): 11.0 ~ 12.5
Phosphorus, P (％): ≤ 0.035
Sulfur, S (％): ≤ 0.015
Chromium, Cr (％): 11.0 ~ 12.5
Nickel, Ni (％): 2.00 ~ 3.00
Molybdenum, Mo (%): 1.50 ~ 2.00
Vanadium, V (%): 0.25 ~ 0.40
Nitrogen, N (%): 0.020 ~ 0.040
MECHANICAL PROPERTIES AT ROOM TEMP.
Tensile strength, Rm ≥ MPa: 950 ~ 1150
Yield strength, Rp0.2 ≥ MPa: 800
Elongation, A5 ≥ (％): 13.0
Yield strength, Rp0.2 ≥ MPa: 800
Elongation, A5 ≥ (％): 13.0
Hardness via heat treatment / HBW: 269 ~ 340
INVENTORY STOCKLIST - Diam.20mm ~ 210mm round bar.
DESCRIPTION
alloy Z12CNDV12-02 is usually produced by EAF + VD, followed by electroslag refining (ESR) / VAR if necessary for special purpose. Bars and, where applicable, forgings are subjected to ultrasonic examination based on the different levels according to the buyers' requirements.
Bars are usually supplied black / bright in the annealed condition.
Final heat treatment - Q + T + SRA.
alloy Z12CNDV12-02 is usually produced by EAF + VD, followed by electroslag refining (ESR) / VAR if necessary for special purpose. Bars and, where applicable, forgings are subjected to ultrasonic examination based on the different levels according to the buyers' requirements.
Bars are usually supplied black / bright in the annealed condition.
Final heat treatment - Q + T + SRA.
PROFILE & DIMENSIONS
Round bar & Disc (diameter): 6.0 ~ 850 mm
Square bar & Flat bar: T10 ~ 500 X W10 ~ 610mm
Length: random length or based on the customer's special requirement.
Heavy/middle plate via hot rolled: T60 ~ 400 X W10 ~ 1000 X L1000 ~ 5000mm.
Square bar & Flat bar: T10 ~ 500 X W10 ~ 610mm
Length: random length or based on the customer's special requirement.
Heavy/middle plate via hot rolled: T60 ~ 400 X W10 ~ 1000 X L1000 ~ 5000mm.
TECHNICAL SALES ASSISTANCE & SERVICE
If you meet further on any technical enquiry or help, you can E-MAIL (sales@ccsteels.com) our qualified production engineers.
If you meet further on any technical enquiry or help, you can E-MAIL (sales@ccsteels.com) our qualified production engineers.
Hot search：Z12CNDV12-02
