AMS 5604
2025-10-31 09:17:00 Origin： Remark：0 Click：
Martensitic precipitation hardening stainless steel AMS 5604 plate, peeled round bar, milled flat bar, 1040 ℃ solution annealed AMS 5604 ESR melted, hot bloomed, rolled, cold drawn
OFFICIAL TEST CERTIFICATE: issued by TUV - SGS - BV
TECHNICAL DATA SHEET - AMS 5604
Material category - martensitic stainless steel
Stock & inventory - sheet / strip T3.0 ~ 25 X W12 ~ 1500 X L mm
HS code for Customs - 72202030 / 72209000
Technical standards - AMS 5604G
Typical chemical compsitions (mass fracton %)
Carbon, C (％): ≤ 0.07
Silicon, Si (％): ≤ 1.00
Manganese, Mn (％): ≤ 1.00
Phosphorus, P (％): ≤ 0.040
Sulfur, S (％): ≤ 0.030
Chromium, Cr (％): 15.0～17.0
Nickel, Ni (％): 3.00 ~ 5.00
Copper, Cu (％): 3.00 ~ 5.00
Silicon, Si (％): ≤ 1.00
Manganese, Mn (％): ≤ 1.00
Phosphorus, P (％): ≤ 0.040
Sulfur, S (％): ≤ 0.030
Chromium, Cr (％): 15.0～17.0
Nickel, Ni (％): 3.00 ~ 5.00
Copper, Cu (％): 3.00 ~ 5.00
Niobium, Nb (%): 5 X C ~ 0.45
MECHANICAL PROPERTIES UNDER ROOM TEMP.
Heat condition: H900 / H1000 / H1050 / H1100 H 1150
Tensile strength, σb / MPa: 1276 Max.
Yield strength, σ0.2 / MPa: 1100 Max.
Elongation, δ5 (％): ≥ 3.0
Reduction of area, ψ (％): ≥ 40.0
Tensile strength, σb / MPa: 1276 Max.
Yield strength, σ0.2 / MPa: 1100 Max.
Elongation, δ5 (％): ≥ 3.0
Reduction of area, ψ (％): ≥ 40.0
Hardness / HRC: 38 max.
APPLICATION FIELD
Flue gas desulfurization scrubbers
Food processing equipment.
Heat exchangers, hydrometallurgy.
Oil and gas production equipment.
Pulp mill bleach systems.
Seawater handling equipment.
Tall oil distillation columns and equipment.
PRODUCT DESCRIPTION
The alloy is usually produced by EAF / AOD / VOD followed by electroslag refining (ESR) / VAR if necessary for special purpose. Bars and, where applicable, forgings are subjected to ultrasonic examination based on the different levels according to the buyers' requirements.
Final heat treatment - solution treatment + aged
The alloy is usually produced by EAF / AOD / VOD followed by electroslag refining (ESR) / VAR if necessary for special purpose. Bars and, where applicable, forgings are subjected to ultrasonic examination based on the different levels according to the buyers' requirements.
Final heat treatment - solution treatment + aged
Heavy/middle plate via hot rolled: T60 ~ 200 X W60 ~ 1200 X L1000 ~ 6000 mm
Steel strip via cold rolled: T0.4 ~ 3 X W5 ~ 200 X L (or in coil form)
Forging piece: stepped shafts, other different shapes based on OEM.
Steel strip via cold rolled: T0.4 ~ 3 X W5 ~ 200 X L (or in coil form)
Forging piece: stepped shafts, other different shapes based on OEM.
TECHNICAL SALES ASSISTANCE & SERVICE
Stock over 60 grades with a competitive price, along with cutting service for specific requirement.
CNC saw cutting.
Marking by stamping or printing.
Third party inspection service.
Export packing / Export documents.
Transport by Track, Sea, Courier (FedEx, UPS, DHL) and Air Cargo.
Marking by stamping or printing.
Third party inspection service.
Export packing / Export documents.
Transport by Track, Sea, Courier (FedEx, UPS, DHL) and Air Cargo.
If you meet further on any technical enquiry or help, pleased to EMAIL our resident team of qualified production engineers. E-mail: sales@ccsteels.com.
