FE-PM 3504 datasheet,FE-PM 3504 chemical,FE-PM 3504 heat treatment

FE-PM 3504
2022-04-27 09:22:54   Origin:   Remark:0 Click:

Description FE-PM 3504 Round bar, Inventory FE-PM 3504 Shaft, Aerospace FE-PM 3504 Wire rod BS EN 4628 Properties Steelmaking, ESR melted, Blooming, Hot forging, Hot rolling, Heat treat, Straightening, 100% Ultrasonic test ASTM E2375 /SAE AMS 2154 /SEP 1923 /GB/T 4162 /EN 10228-3. Cold working, Polishing, Centerless grinding, Peeling or rough turned machining. Material technical specification AIR 9160/C - 1973.

RAW MATERIAL SPECIFICATION - Grade FE-PM 3504


Technical Specifications - BS EN 4628 : 2007
Material Type - High tensile strength 1150 ~ 1300MPa Martensitic 
stainless steel
Official Test Certificate: issued by TUV - SGS
Inventory Stocklist - Diameter 34mm / 16mm
Custom HS code - 72221100 / 72222000
Chemical Composition (Mass weight - %)
C (%):     ≤ 0.06
Si (%):     ≤ 0.70
Mn (%):   ≤ 1.50
P (%) ≤:  0.035
S (%) ≤:  0.015
Cr (%):    15.0 ~ 17.0
Mo (%):   0.80 ~ 1.50
Ni (%):    4.00 ~ 6.00
N (%):     ≥ 0.020
MECHANICAL PROPERTIES UNDER ROOM TEMP.
Tensile strength,σb/≥ MPa: 1150 ~ 1300
Yield strength, σ0.2/≥ MPa: 900
Elongation, δ ≥(%): 14.0
Reduction of area, ф ≥ (%): -
Impact, AKv (J/cm2): 100 min.
Heat treated hardness | HB 341 ~ 401
Quenching, 1030,+/-10 Deg, tempering 400, +/-5 Deg.
AVAILABLE FORMS AND SHAPES
Round bar (Diameter): 5.5 mm to 500mm
Square bar / Flat bar: 3mm to 500mm
Steel strip: T0.20 ~ 3mm X W10 ~ 200mm X Coil
Forging piece: stepped shafts with flanks / discs /tubes /slugs /donuts /cubes /other different shapes based on OEM.
TECHNICAL SALES ASSISTANCE
If you meet further on any technical enquiry or help, pleased to EMAIL our resident team of qualified production engineers. E-mail:
sales@ccsteels.com

Hot search:FE-PM 3504

Previous page:STS 446M
Last page:最后一页

Share to: