S42225
2014-10-17 10:19:26 Origin： Remark：0 Click：
Description S42225 Wire rod, Inventory S42225 Plate, Ex-stock S42225 Steel Strip Sheet property from Steelmaking, ESR melted, Blooming, Hot forging, Hot rolling, Heat treatment, Straightening, 100% Ultrasonic test, Cold working or rough turned machining.
TURBINE BLADE STEEL DATA SHEET - UNS S42225
MATERIAL CATEGORY - Martensitic type 12Cr-Ni-Mo-W-V
INVENTORY SALES - Round bar diameter 70mm / 85mm / 120mm
PRODUCT DESCRIPTION
The alloy is usually produced by BEF + AOD / EAF followed by electroslag refining (ESR) / VAR if necessary for special purpose.
Bars and, where applicable, forgings are subjected to ultrasonic examination based on the different levels according to the buyers' requirements.
Bars are usually supplied black/bright in the annealed condition.
Final heat treatment - Quenched and termpered + SRA
The alloy is usually produced by BEF + AOD / EAF followed by electroslag refining (ESR) / VAR if necessary for special purpose.
Bars and, where applicable, forgings are subjected to ultrasonic examination based on the different levels according to the buyers' requirements.
Bars are usually supplied black/bright in the annealed condition.
Final heat treatment - Quenched and termpered + SRA
AVAILABILITY
Round bar / flat bar / plate / forgings
Bright - peeled + polishing, centerless grinding
Forged - ring, tube, pipe casing, discs, shaft
Round bar / flat bar / plate / forgings
Bright - peeled + polishing, centerless grinding
Forged - ring, tube, pipe casing, discs, shaft
PROFILE & DIMENSIONS
Round bar / Wire rod (Diameter): 5.5mm to 600mm
Square bar / Flat bar: 3mm to 1000mm
Plate / Sheet steel / Steel strip: 1.5mm to 1200mm
Width: 8mm to 1200mm
Length: random length or based on the customer's special requirement.
Forged steel shape: stepped shafts with flanks / discs /tubes /slugs /donuts /cubes /other different shapes based on OEM.
Round bar / Wire rod (Diameter): 5.5mm to 600mm
Square bar / Flat bar: 3mm to 1000mm
Plate / Sheet steel / Steel strip: 1.5mm to 1200mm
Width: 8mm to 1200mm
Length: random length or based on the customer's special requirement.
Forged steel shape: stepped shafts with flanks / discs /tubes /slugs /donuts /cubes /other different shapes based on OEM.
MATERIAL SPECIFICATIONS - ASTM A959 (2004), A276, A580
CHEMICAL COMPOSITION (Mass weight - %)
C (％): 0.20 ~ 0.25
Si (％): 0.20 ~ 0.50
Mn (％): 0.50 ~ 1.00
P (％)≤: 0.020
S (％)≤: 0.010
Cr (％): 11.5 ~ 12.5
Ni (％): 0.50 ~ 1.00
Mo (％): 0.90 ~ 1.25
C (％): 0.20 ~ 0.25
Si (％): 0.20 ~ 0.50
Mn (％): 0.50 ~ 1.00
P (％)≤: 0.020
S (％)≤: 0.010
Cr (％): 11.5 ~ 12.5
Ni (％): 0.50 ~ 1.00
Mo (％): 0.90 ~ 1.25
W (%): 0.90 ~ 1.25
V (%): 0.20 ~ 0.30
Other (％): Cu≤0.15, Nb≤0.05, Al≤0.025, Sn≤0.02, Co≤0.20,Ti ≤0.025
MECHANICAL PROPERTIES UNDER ROOM TEMP.
Form: Round bar, Flat bar, forge piece, Ring.
Tensile strength, σb/MPa: 985
Yield strength, σ0.2/MPa: 785
Elongation, δ (％): 12.0
Reduction of area, ф (％): 25.0
Hardness | HRB: 260
Form: Round bar, Flat bar, forge piece, Ring.
Tensile strength, σb/MPa: 985
Yield strength, σ0.2/MPa: 785
Elongation, δ (％): 12.0
Reduction of area, ф (％): 25.0
Hardness | HRB: 260
HEAT TREATMENT PRACTICE
Heat treatment is only suitable for specific grades of stainless steel. When heat treating a stainless the hardening temperatures, including rate of heating, cooling and soaking times will vary due to several factors such as the shape and size of each component. Other considerations during the heat treatment process include the type of furnace, quenching medium and work piece transfer facilities. Please consult with the heat treatment provider for whole guidance on heat treatment of stainless steel grades. We are delighted to help to work with you the special heat treatment based on your special requirements.
TECHNICAL SALES ASSISTANCE
If you meet further on any technical enquiry. pleased to EMAIL (sales@ccsteels.com) our resident team of qualified production engineers.
Heat treatment is only suitable for specific grades of stainless steel. When heat treating a stainless the hardening temperatures, including rate of heating, cooling and soaking times will vary due to several factors such as the shape and size of each component. Other considerations during the heat treatment process include the type of furnace, quenching medium and work piece transfer facilities. Please consult with the heat treatment provider for whole guidance on heat treatment of stainless steel grades. We are delighted to help to work with you the special heat treatment based on your special requirements.
TECHNICAL SALES ASSISTANCE
If you meet further on any technical enquiry. pleased to EMAIL (sales@ccsteels.com) our resident team of qualified production engineers.
Hot search：S42225
Previous page：S42700
Last page：UNS S42800
