X45Cr9Si3
2023-07-08 08:52:11 Origin： Remark：0 Click：
IS 1570-5 (1985 Martensitic Steel X45Cr9Si3 Round bar, Wire rod X45Cr9Si3 ESR melted, Hot rolling, Heat treatment, Cold working or rough turned machining.
MATERIAL TECHNICAL DATASHEET - Grade X45Cr9Si3
Official Test Report: issued by TUV - SGS - BV
Special Melting Practice - EAF + LF + VD / + ESR
HS Code For Customs - 72221100 / 72221900 / 72222000
Inventory on hand - Round bar / wire rod Diam. 5.5 ~ 10.0mm
Material Specifications - IS 1570-5 (1985 / 2004)
Official Test Report: issued by TUV - SGS - BV
Special Melting Practice - EAF + LF + VD / + ESR
HS Code For Customs - 72221100 / 72221900 / 72222000
Inventory on hand - Round bar / wire rod Diam. 5.5 ~ 10.0mm
Material Specifications - IS 1570-5 (1985 / 2004)
MAIN CHEMICAL COMPOSITION (mass weight - %)
Carbon, C (％): 0.40 ~ 0.50
Silicon, Si (％): 3.00 ~ 3.75
Manganese, Mn (％): 0.30 ~ 0.60
Phosphorus, P (％) ≤: 0.040
Sulfur, S (％) ≤: 0.030
Chromium, Cr (％): 7.50 ~ 9.50
Nickel, Ni (％): ≤ 0.50
Molybdenum, Mo (％): -
Ferrum, Fe (%): balance.
Carbon, C (％): 0.40 ~ 0.50
Silicon, Si (％): 3.00 ~ 3.75
Manganese, Mn (％): 0.30 ~ 0.60
Phosphorus, P (％) ≤: 0.040
Sulfur, S (％) ≤: 0.030
Chromium, Cr (％): 7.50 ~ 9.50
Nickel, Ni (％): ≤ 0.50
Molybdenum, Mo (％): -
Ferrum, Fe (%): balance.
MECHANICAL PROPERTY AT ROOM TEMPERATURE
Forms: Round bar, flat bar, forgings and plate
Annealing temp: 800 ~ 900℃, slow cooling
Quenching 900 ~ 1080℃, oil cooled, tempering 700 ~ 850 ℃, quick cooling.
Tensile strength, σb/≥ MPa: 930
Yield strength, σ0.2/MPa: 685
Elongation, δ ≥(％): 15.0
Reduction of area, ф ≥ (％): 40.0
Hardness via heat treatment /HBW: 269 min.
Forms: Round bar, flat bar, forgings and plate
Annealing temp: 800 ~ 900℃, slow cooling
Quenching 900 ~ 1080℃, oil cooled, tempering 700 ~ 850 ℃, quick cooling.
Tensile strength, σb/≥ MPa: 930
Yield strength, σ0.2/MPa: 685
Elongation, δ ≥(％): 15.0
Reduction of area, ф ≥ (％): 40.0
Hardness via heat treatment /HBW: 269 min.
PRODUCT DESCRIPTION
The alloy is usually produced by EAF +LF + VD / AOD / EF followed by electroslag refining (ESR) / VAR if necessary for special purpose.
Bars and, where applicable, forgings are subjected to ultrasonic examination based on the different levels according to the buyers' requirements.
Bars are usually supplied black/bright in the annealed condition.
Final heat treatment - Quenched and tempered + Stress relief annealing. Solution treatment + aged
The alloy is usually produced by EAF +LF + VD / AOD / EF followed by electroslag refining (ESR) / VAR if necessary for special purpose.
Bars and, where applicable, forgings are subjected to ultrasonic examination based on the different levels according to the buyers' requirements.
Bars are usually supplied black/bright in the annealed condition.
Final heat treatment - Quenched and tempered + Stress relief annealing. Solution treatment + aged
PROFILE & DIMENSIONS & SERVICE
Round bar (diameter): 5.5mm to 200mm
Square bar / Flat bar: 10mm to 550mm
Length: Fixed length or random length or based on the customer's special requirement.
Heavy / middle plate via hot rolled: T10 ~ 400mm X W70 ~ 1200mm X Lmm
Sheet steel via cold rolled: T0.5 - 6mm X W60 ~ 1220mm X Lmm
Steel strip via cold rolled: T0.1 - 3mm X W5 - 1200mm X L (or in coil form)
Forging piece: stepped shafts, other different shapes based on OEM.
CNC saw cutting.
Marking by stamping or printing.
Third party inspection service.
Export packing / Export documents.
Transport by Track, Sea, Courier (FedEx, UPS, DHL) and Air Cargo.
Round bar (diameter): 5.5mm to 200mm
Square bar / Flat bar: 10mm to 550mm
Length: Fixed length or random length or based on the customer's special requirement.
Heavy / middle plate via hot rolled: T10 ~ 400mm X W70 ~ 1200mm X Lmm
Sheet steel via cold rolled: T0.5 - 6mm X W60 ~ 1220mm X Lmm
Steel strip via cold rolled: T0.1 - 3mm X W5 - 1200mm X L (or in coil form)
Forging piece: stepped shafts, other different shapes based on OEM.
CNC saw cutting.
Marking by stamping or printing.
Third party inspection service.
Export packing / Export documents.
Transport by Track, Sea, Courier (FedEx, UPS, DHL) and Air Cargo.
TECHNICAL SALES ASSISTANCE
20+ years Focus On Special Steel Manufacturing and processing.
Stock over 60 grades with a competitive price, along with cutting service for specific requirements.
Customizing special material is welcome.
We closely cooperate with the professional inspection partners to strictly control the quality and improve the quality manage system, and guarantee the goods delivery each time. It is proved that we are worth of trusting and will be the strategic partner of the supplying chains in the special steels field.
If you meet further on any technical enquiry, pleased to EMAIL our resident team of qualified production engineers, Email: sales@ccsteels.com.
20+ years Focus On Special Steel Manufacturing and processing.
Stock over 60 grades with a competitive price, along with cutting service for specific requirements.
Customizing special material is welcome.
We closely cooperate with the professional inspection partners to strictly control the quality and improve the quality manage system, and guarantee the goods delivery each time. It is proved that we are worth of trusting and will be the strategic partner of the supplying chains in the special steels field.
If you meet further on any technical enquiry, pleased to EMAIL our resident team of qualified production engineers, Email: sales@ccsteels.com.
Hot search：X45Cr9Si3
Previous page：42Cr4Mo2
Last page：X80Cr20Si2Ni1
