1.3812
2023-11-26 16:40:01 Origin: Remark:0 Click:
OFFICIAL TEST CERTIFICATE: issued by TUV - SGS - BV
TECHNICAL DATASHEET - Grade W-Nr 1.3812
MATERIAL CATEGORY - Non-magnetic stainless steel and alloy
MATERIAL SPECIFICATIONS - DIN SEW 390 (1991)
STOCK AVAILABLE - Round bar Diameter 55 ~ 250mm
MAIN CHEMICAL COMPOSITION (mass weight - %)
Carbon, C (%): 0.30 ~ 0.50
Silicon, Si (%): ≤ 0.80
Manganese, Mn (%): 17.0 ~ 19.0
Phosphorus, P (%) ≤: 0.060
Sulfur, S (%) ≤: 0.030
Chromium, Cr (%): 5.00 ~ 6.00
Nickel, Ni (%): -
Molybdenim, Mo (%): -
Nitrogen, N (%): 0.10 ~ 0.20
HOT WORKING, HEAT TREATMENT AND MECHANICAL PROPERTIES
Hot working temperature: 1050 ~ 850℃
Quenching or solution treatment temperature: 1000 ~ 1050℃
Tensile strength, σb ≥ MPa: 690 ~ 1080
Yield strength, σ0.2 ≥ MPa: 315
Elongation, δ ≥ (%): 45.0
Impact strength, Akv ≥: 124 J
TYPICAL APPLICATIONS
High-voltage electrical apparatus, bolts and nuts.
Transformer tank, Generator ring, Preparation equipments, Electronics.
PRODUCT MELTING PROCESS
The alloy is usually produced by AOD / EAF followed by electroslag refining (ESR) / VAR if necessary for special purpose. Bars and, where applicable, forgings are subjected to ultrasonic examination based on the different levels according to the buyers' requirements.
Bars are usually supplied black/bright in the annealed condition.
Final heat treatment - solution + aged.
PRODUCT FORMS & DIMENSIONS
Round bar & Disc (diameter): 5.5mm to 800mm
Square bar / flat bar: 10mm to 600mm
Length: fixed length, random length or based on the customer's special requirement.
Heavy/middle plate via hot rolled: T60 - 400mm X W60 - 1000mm X L1000 - 5000mm
Forging piece: stepped shafts, other different shapes based on OEM.
TECHNICAL SALES ASSISTANCE
If you meet further on any technical enquiry, pleased to EMAIL (sales@ccsteels.com) our resident team of qualified production engineers.
Hot search:1.3812
Previous page:12Cr9Mo10H
Last page:X40MnCr18-4