St T17/13W
2017-11-21 14:40:16 Origin： Remark：0 Click：
Specifications St17/13W Datasheet, St17/13W Chemical, St.T17/13W mechanical properties from Steelmaking, ESR melting, Hot blooming, UT, Hot forging, Hot rolling, Heat treat, Straightening, 100% Ultrasonic test, Cold working or Machined. Technical specifications - NF A36-209 - 1992. 100% Ultrasonic test ASTM E2375 /SAE AMS 2154 /SEP 1923 /GB/T 4162 /EN 10228-3.
TECHNICAL DATASHEET - St T17/13W
OFFICIAL TEST CERTIFICATE - issued by TUV - SGS - BV
MATERIAL SPECIFICATIONS - Creep resistant Steel
MATERIAL SPECIFICATIONS - Creep resistant Steel
CHEMICAL COMPOSITION ( MASS WEIGHT %)
C (％): 0.08 ~ 0.15
Si (％): ≤ 0.80
C (％): 0.08 ~ 0.15
Si (％): ≤ 0.80
Mn (％): ≤ 1.00
P (％)≤: 0.035
S (％)≤: 0.005
Cr (％): 15.5 ~ 17.5
P (％)≤: 0.035
S (％)≤: 0.005
Cr (％): 15.5 ~ 17.5
Mo (％): ≤ 0.50
Ni (%): 13.0 ~ 14.5
Cu (%): ≤ 0.30
W (%): 2.50 ~ 3.00
B (%): ≤ 0.006
V (%): ≤ 0.10
Ti (%): 5 X C ~ 0.85
MECHANICAL PROPERTIES UNDER ROOM TEMP.
Tensile strength, TS, σb/≥ MPa: 590
Yield strength, YS, σ0.2/≥ MPa: 440 ~ 650
Elongation, EL, δ ≥(％): 20.0
Yield strength, YS, σ0.2/≥ MPa: 440 ~ 650
Elongation, EL, δ ≥(％): 20.0
Reduction of area, RA, (%): -
Annealed hardness, HB ≤: 180 ~ 240
PRODUCT DESCRIPTION
The alloy is usually produced by IFF + AOD + VD /AOD / EF / EAF + VD followed by electroslag refining (ESR) / VAR if necessary for special purpose.
Bars and, where applicable, forgings are subjected to ultrasonic examination based on the different levels according to the buyers' requirements.
Bars are usually supplied black/bright in the annealed condition.
Final heat treatment - Quenched and tempered thermal treatment
The alloy is usually produced by IFF + AOD + VD /AOD / EF / EAF + VD followed by electroslag refining (ESR) / VAR if necessary for special purpose.
Bars and, where applicable, forgings are subjected to ultrasonic examination based on the different levels according to the buyers' requirements.
Bars are usually supplied black/bright in the annealed condition.
Final heat treatment - Quenched and tempered thermal treatment
TECHNICAL SALES ASSISTANCE
If you meet further on any technical enquiry or help, you can do as follows:
EMAIL our qualified production engineers, Email us: sales@ccsteels.com.
If you meet further on any technical enquiry or help, you can do as follows:
EMAIL our qualified production engineers, Email us: sales@ccsteels.com.
Previous page：X10CrNiW17-13-3
Last page：Z4CNb17
Total list
Monthly rank
- 39ASTM A565 Gr.616HT
- 37X35CrMo17
- 30ASTM A638 Gr.660
- 28EN 58A
- 27Z10CNT18-11
- 26SAE 30304
- 26ASTM A538 / AMS 6514
- 26AISI 306
- 25Z15CN17-03
- 2410705MBU
