Jethete M160
2023-12-08 13:50:42 Origin: Remark:0 Click:
Martensitic Stainless ESR Quality Steel Jethete M160 Round bar, flat bar, Electroslag remelted, Jethete M160 Hot forging, Rolling, Heat treatment, Cold worked, Straightened.
OFFICIAL TEST CERTIFICATE: issued by TUV - SGS - BV
MATERIAL SPECIFICATION - Grade Jethete M160
MATERIAL CATEGORY - Aerospace "S" Series alloy steel
Melting process - Consumable electrode remelted
H S Code for Customs - 72201100 / 72202030 / 72222000 / 72223000
Main Chemical Elements (mass weight - %)
Main Chemical Elements (mass weight - %)
Carbon, C (%): 0.08 ~ 0.16
Silicon, Si (%): 0.15 ~ 0.60
Manganese, Mn (%): 0.30 ~ 1.20
Phosphorus, P (%) ≤: 0.030
Sulfur, S (%) ≤: 0.025
Chromium, Cr (%): 9.80 ~ 11.2
Nickel, Ni (%): 0.60 ~ 1.20
Molybdenum, Mo (%): 0.40 ~ 0.80
Silicon, Si (%): 0.15 ~ 0.60
Manganese, Mn (%): 0.30 ~ 1.20
Phosphorus, P (%) ≤: 0.030
Sulfur, S (%) ≤: 0.025
Chromium, Cr (%): 9.80 ~ 11.2
Nickel, Ni (%): 0.60 ~ 1.20
Molybdenum, Mo (%): 0.40 ~ 0.80
Niobium, Nb/Ti (%): 0.15 ~ 0.45
Vanadium, V (%): 0.10 ~ 0.25
Nitrogen, N (%): 0.030 ~ 0.075
HEAT TREATMENT AND MECHANICAL PROPERTIES
Heat treatment temperature and cooling: Heat treatment
Tensile strength, σb≥/MPa: 930 ~ 1080
Tensile strength, σb≥/MPa: 930 ~ 1080
Yield strength, σ0.2≥/MPa: 760
Elongation, δ5 (%)≥: 14.0
Hardness ≤HBW: 285 ~ 331
Elongation, δ5 (%)≥: 14.0
Hardness ≤HBW: 285 ~ 331
PRODUCT DESCRIPTION
The alloy is usually produced by AOD / EAF followed by electroslag refining (ESR) / VAR if necessary for special purpose. Bars and, where applicable, forgings are subjected to ultrasonic examination based on the different levels according to the buyers' requirements.
Bars are usually supplied black/bright in the annealed condition.
Final heat treatment - Quenched and tempered + Stress relief annealing.
The alloy is usually produced by AOD / EAF followed by electroslag refining (ESR) / VAR if necessary for special purpose. Bars and, where applicable, forgings are subjected to ultrasonic examination based on the different levels according to the buyers' requirements.
Bars are usually supplied black/bright in the annealed condition.
Final heat treatment - Quenched and tempered + Stress relief annealing.
PRODUCT FORMS & DIMENSIONS
Round bar / Disc (diameter1): 5.5mm to 850mm
Square bar / Flat bar: 10mm to 800mm
Heavy/middle plate via hot rolled: T60 - 560mm X W50 - 1000mm X L1000 - 12000mm
Square bar / Flat bar: 10mm to 800mm
Heavy/middle plate via hot rolled: T60 - 560mm X W50 - 1000mm X L1000 - 12000mm
Steel strip via cold rolled: T0.1 - 3mm X W5 - 200mm X L (or in coil form)
Forging piece: stepped shafts, other different shapes based on OEM.
Forging piece: stepped shafts, other different shapes based on OEM.
ADVANTAGE & SUPERIOR SERVICE
20+ years Focus On Special Steel Manufacturing and processing.
Stock over 60 grades with a competitive price, along with cutting service for specific requirement.
CNC saw cutting.
Marking by stamping or printing.
Third party inspection service.
Export packing / Export documents.
20+ years Focus On Special Steel Manufacturing and processing.
Stock over 60 grades with a competitive price, along with cutting service for specific requirement.
CNC saw cutting.
Marking by stamping or printing.
Third party inspection service.
Export packing / Export documents.
Previous page:X80CrCo13-1
Last page:21C10BT