S50100
2025-06-11 17:17:00 Origin： Remark：0 Click：
Specifications S50100 techncial data sheet, S50100 round bar, plate, rod properties from steelmaking, hot forging, hot rolling, heat treatment, cold working.
TECHNICAL DATA SHEET - UNS S50100
MATERIAL CATEGORY: Martensite type 5Cr-Mo
PRODUCT DESCRIPTION
The alloy is usually produced by AOD or VIM followed by electroslag refining (ESR) / VAR if necessary for special purpose. Bars and, where applicable, forgings are subjected to ultrasonic examination based on the different levels according to the buyers' requirements.
Bars are usually supplied bright in the annealed condition.
Final heat treatment - QT.
The alloy is usually produced by AOD or VIM followed by electroslag refining (ESR) / VAR if necessary for special purpose. Bars and, where applicable, forgings are subjected to ultrasonic examination based on the different levels according to the buyers' requirements.
Bars are usually supplied bright in the annealed condition.
Final heat treatment - QT.
MATERIAL SPECIFICATIONS - ASTM A959 (2004), A276, A312, A632, A176, A580
CHEMICAL COMPOSITIONS (mass weight %)
Carbon, C (％): ≥ 0.10
Silicon, Si (％): ≤ 1.00
Manganese, Mn (％): ≤ 1.00
Phosphorus, P (％) ≤: 0.040
Sulfur, S (％) ≤: 0.030
Chromium, Cr (％): 4.00 ~ 6.00
Nickel, Ni (％): -
Molybdenum, Mo (％): 0.40 ~ 0.65
Silicon, Si (％): ≤ 1.00
Manganese, Mn (％): ≤ 1.00
Phosphorus, P (％) ≤: 0.040
Sulfur, S (％) ≤: 0.030
Chromium, Cr (％): 4.00 ~ 6.00
Nickel, Ni (％): -
Molybdenum, Mo (％): 0.40 ~ 0.65
MECHANICAL PROPERTIES UNDER ROOM TEMP.
Condition of heat treatment: QT
Tensile strength, σb / MPa: 590
Yield strength, σ0.2 / MPa: 390
Yield strength, σ0.2 / MPa: 390
Elongation, δ5 (％): 18.0
Reduction of area, ф (％): -
PRODUCT PROFILE & DIMENSIONS
Reduction of area, ф (％): -
PRODUCT PROFILE & DIMENSIONS
Rod / round bar / disc (diameter): 5.5mm to 850mm
Square bar / flat bar: 8mm to 600mm
Plate / Sheet steel / Steel strip: 0.1mm to 1000mm
Width: 8mm to 1000mm
Length: random length or based on the customer's special requirement.
Forged steel shape: stepped shafts, and other different shapes based on OEM.
Square bar / flat bar: 8mm to 600mm
Plate / Sheet steel / Steel strip: 0.1mm to 1000mm
Width: 8mm to 1000mm
Length: random length or based on the customer's special requirement.
Forged steel shape: stepped shafts, and other different shapes based on OEM.
TECHNICAL SALES ASSISTANCE
If you meet further on any technical enquiry, pleased to EMAIL our resident team of qualified production engineers, Email: sales@ccsteels.com.
If you meet further on any technical enquiry, pleased to EMAIL our resident team of qualified production engineers, Email: sales@ccsteels.com.
Hot search：S50100
