X2CrNi18-9
2025-08-04 13:36:00 Origin： Remark：0 Click：
Stock list X2CrNi18-9 Steel coil, Sheet X2CrNi18-9 Ex-stock, Strip coil X2CrNi18-9 wire Properties from steelmaking, hot forging, hot rolling, heat treatment, cold working
MATERIAL SPECIFICATIONS - X2CrNi18-9 & 1.4307
MATERIAL CATEGORY: Austenitic corrosion resisting steels
PRODUCT DESCRIPTION
The alloy is usually produced by AOD / VOD followed by electroslag refining (ESR) / VAR if necessary for special purpose. Bars and, where applicable, forgings are subjected to ultrasonic examination based on the different levels according to the buyers' requirements.
Bars are usually supplied black/bright in the annealed condition.
Final heat treatment - solution treatment.
The alloy is usually produced by AOD / VOD followed by electroslag refining (ESR) / VAR if necessary for special purpose. Bars and, where applicable, forgings are subjected to ultrasonic examination based on the different levels according to the buyers' requirements.
Bars are usually supplied black/bright in the annealed condition.
Final heat treatment - solution treatment.
MATERIAL SPECIFICATIONS - DIN 17445,17440, DIN EN 10088-1, 10297,10272,10312
CHEMICAL COMPOSITIONS (mass weight %)
Carbon, C (％): ≤ 0.030
Silicon, Si (％) ≤: 1.00
Manganese, Mn (％) ≤: 2.00
Phosphorus, P (％) ≤: 0.045
Sulfur, S (％) ≤: 0.030
Chromium, Cr (％): 17.5 ~ 19.5
Nickel, Ni (％): 8.00 ~ 10.5
Molybdenum, Mo (％): -
Other (％): N ≤ 0.11
Silicon, Si (％) ≤: 1.00
Manganese, Mn (％) ≤: 2.00
Phosphorus, P (％) ≤: 0.045
Sulfur, S (％) ≤: 0.030
Chromium, Cr (％): 17.5 ~ 19.5
Nickel, Ni (％): 8.00 ~ 10.5
Molybdenum, Mo (％): -
Other (％): N ≤ 0.11
MECHANICAL PROPERTIES UNDER ROOM TEMPERATURE
Condition: solution treatment
Thickness/mm:160/250
Thickness/mm:160/250
Tensile strength, σb / MPa: 460~680
Yield strength, σ0.2 ≥ MPa:180
Elongation, δ5 ≥ (％): 45 / 35
Elongation, δ5 ≥ (％): 45 / 35
Reduction of area, ψ ≥ (％): 60
Impact strength, Akv ≥ J: 100/60
40Hardness HBS30: 215 max
Impact strength, Akv ≥ J: 100/60
40Hardness HBS30: 215 max
MECHANICAL PROPERTIES ABOVE ROOM TEMPERATURE
Hot forming temp/℃: 1200 ~ 900
Heat treatment temperature and cooling methods|annealing: -
Heat treatment temperature and cooling methods|quenching: 1000~1100 air/water cooled
Heat treatment temperature and cooling methods|tempering: -
Condition: solution
High temperature yield strength σ0.2/MPa≥/MPa，at below temp/℃|100: 145
High temperature yield strength σ0.2/MPa≥/MPa，at below temp/℃|200: 118
High temperature yield strength σ0.2/MPa≥/MPa，at below temp/℃|200: 118
High temperature yield strength σ0.2/MPa≥/MPa，at below temp/℃|300: 100
High temperature yield strength σ0.2/MPa≥/MPa，at below temp/℃|400: 89
High temperature yield strength σ0.2/MPa≥/MPa，at below temp/℃|400: 89
High temperature yield strength σ0.2/MPa≥/MPa，at below temp/℃|500: 81
HEAT TREATMENT PRACTICE
Heat treatment is only suitable for specific grades of stainless steel. When heat treating a stainless the hardening temperatures, including rate of heating, cooling and soaking times will vary due to several factors such as the shape and size of each component. Other considerations during the heat treatment process include the type of furnace, quenching medium and work piece transfer facilities. Please consult with the heat treatment provider for whole guidance on heat treatment of stainless steel grades. We are delighted to help to work with you the special heat treatment based on your special requirements.
Heat treatment is only suitable for specific grades of stainless steel. When heat treating a stainless the hardening temperatures, including rate of heating, cooling and soaking times will vary due to several factors such as the shape and size of each component. Other considerations during the heat treatment process include the type of furnace, quenching medium and work piece transfer facilities. Please consult with the heat treatment provider for whole guidance on heat treatment of stainless steel grades. We are delighted to help to work with you the special heat treatment based on your special requirements.
TYPICAL APPLICATIONS
Medical equipment, Chemical equipments.
Mechanical parts used in the condition of corrosion resistance.
Bolt and nut, Pressure vessel.
Mechanical parts used in the condition of corrosion resistance.
Bolt and nut, Pressure vessel.
INVENTORY - cold / hot rolled sheet coil
PRODUCT PROFILE
Round bar / rod (diameter): 5.5 to 800mm
Square bar / flat bar: 8 to 600mm
Round bar / rod (diameter): 5.5 to 800mm
Square bar / flat bar: 8 to 600mm
Length: random length or based on the customer's special requirement.
Heavy / middle plate via hot rolled: T6 - 200 X W1000- 2000 X L1000-12000mm
Heavy / middle plate via hot rolled: T6 - 200 X W1000- 2000 X L1000-12000mm
Sheet steel via cold rolled: T0.5 - 6 X W600- 1000 X L1000 - 2000mm
Steel strip via cold rolled: T0.1 - 3 X W5 - 200 X L (or in coil form)
Forging piece: stepped shafts, other different shapes based on OEM.
ADVANTAGE & SUPERIOR SERVICE
20+ years Focus On Special Steel Manufacturing and processing.
Stock over 60 grades with a competitive price, along with cutting service for specific requirement.
CNC saw cutting.
Marking by stamping or printing.
Third party inspection service.
Export packing / Export documents.
Transport by Track, Sea, Courier (FedEx, UPS, DHL) and Air Cargo.
20+ years Focus On Special Steel Manufacturing and processing.
Stock over 60 grades with a competitive price, along with cutting service for specific requirement.
CNC saw cutting.
Marking by stamping or printing.
Third party inspection service.
Export packing / Export documents.
Transport by Track, Sea, Courier (FedEx, UPS, DHL) and Air Cargo.
Hot search：X2CrNi18-9
Previous page：T41
Last page：1.4307 /DIN X2CrNi18-9
Total list
Monthly rank
- 2910705BU
- 21ASTM A638 Gr.660
- 17X66Cr13
- 16X12CrNi17-7
- 1510705MBU
- 15AISI 306
- 14EN 58A
- 14ASTM A890 Grade 4A
- 12Z50NMC12
- 121.4452