AMS 5570
2021-05-10 11:36:09 Origin: Remark:0 Click:
Aerospace Material AMS 5570 Specifications, Flat bar, Round bar, Sheet AMS 5570 Steelmelting (ESR refined), Hot forging, Hot rolling, Heat treatment
MATERIAL TECHNICAL STANDARD - AMS 5570
MATERIAL CATEGORY - High Alloy Aerospace Material Steel Series
TECHNICAL SPECIFICATION - AMS 5570Q
HS CODE - 72221100 / 72221900 / 72223000
TECHNICAL SPECIFICATION - AMS 5570Q
HS CODE - 72221100 / 72221900 / 72223000
OFFICIAL TEST REPORT - issued by TUV - SGS - BV
CHEMICAL COMPOSITIONS (mass weight - %)
Carbon, C (%): ≤ 0.08
CHEMICAL COMPOSITIONS (mass weight - %)
Carbon, C (%): ≤ 0.08
Manganese, Mn (%): ≤ 2.00
Silicon, Si (%): 0.25 ~ 1.00
Phosphorus, P (%) ≤: 0.040
Sulfur, S (%) ≤: 0.030
Chromium, Cr (%): 17.0 ~ 19.0
Silicon, Si (%): 0.25 ~ 1.00
Phosphorus, P (%) ≤: 0.040
Sulfur, S (%) ≤: 0.030
Chromium, Cr (%): 17.0 ~ 19.0
Nickel, Ni (%): 9.00 ~ 13.0
Titanium, Ti (%): 5 X (C+N) ~ 0.70
Molybdenum, Mo (%): ≤ 0.75
Copper, Cu (%): ≤ 0.75
Nitrogen, N (%): ≤ 0.10
MECHANICAL PROPERTIES UNDER ROOM TEMP.
Form: Tubings and forgings
Form: Tubings and forgings
Heat treatment condition: 1040 ~ 1070 Deg. C
Tensile strength, σb/MPa: 517
Yield strength, σ0.2/MPa: 207
Tensile strength, σb/MPa: 517
Yield strength, σ0.2/MPa: 207
Elongation, δ(%): 30.0
Reduction of area, ф(%): -
Hardness + solution annealed (HB): -
MELTING PROCESS & APPLICATION
This alloy is generally smelt in Basic Electric Furnace (EAF, AOD, VOD) or VIM + Electroslag remelting (ESR). For a purpose of superior quality, it should be smelt via technology of vacuum refining or by agreement.
It is suitable for applications such as high tensile shafts, bolts and nuts, gears, pinions spindles and so on.
AVAILABLE FORMS & DIMENSIONS
Round bar & Disc: 5.5mm to 500mm
Square bar / Flat bar: 10mm to 610mm
Wire rod: 0.5mm to 13.0mm
Steel strip: THK0.5 ~ 3.0mm, Width 10 ~ 300mm
Length: Fixed length or random length or based on the customer's special requirement.
Other different shapes based on OEM.
TECHNICAL SALES ASSISTANCE & SERVICE
If you meet further on any technical enquiry, pleased to EMAIL our resident team of qualified production engineers. E-mail: sales@ccsteels.com.
Reduction of area, ф(%): -
Hardness + solution annealed (HB): -
MELTING PROCESS & APPLICATION
This alloy is generally smelt in Basic Electric Furnace (EAF, AOD, VOD) or VIM + Electroslag remelting (ESR). For a purpose of superior quality, it should be smelt via technology of vacuum refining or by agreement.
It is suitable for applications such as high tensile shafts, bolts and nuts, gears, pinions spindles and so on.
AVAILABLE FORMS & DIMENSIONS
Round bar & Disc: 5.5mm to 500mm
Square bar / Flat bar: 10mm to 610mm
Wire rod: 0.5mm to 13.0mm
Steel strip: THK0.5 ~ 3.0mm, Width 10 ~ 300mm
Length: Fixed length or random length or based on the customer's special requirement.
Other different shapes based on OEM.
TECHNICAL SALES ASSISTANCE & SERVICE
If you meet further on any technical enquiry, pleased to EMAIL our resident team of qualified production engineers. E-mail: sales@ccsteels.com.
Previous page:AMS 5567
Last page:EN56B & EN 50B