BS X4CrNiMo16-5-1
2015-03-16 10:29:29 Origin： Remark：0 Click：
EN X4CrNiMo16-5-1 Round bar, Plate X4CrNiMo16-5-1 Stocklist, Wire rod X4CrNiMo16-5-1 Ring forging Bar, Wire rod, Sheet - steelmaking, ESR, Blooming, Hot Forging / Rolling, Heat treatment, Straightened, Ultrasonic test, Cold working, Machined. We also possess advanced precision machining equipments for further processing.
Technical Standards - BS EN 10088-3 (2005) or by agreement.
OFFICIAL TEST CERTIFICATE: issued by TUV - SGS - BV
TECHNICAL SPECIFICATION - Grade BS X4CrNiMo16-5-1
MATERIAL CATEGORY - Stainless steel round bar, wire rod, and semi-finished products
STEEL TYPE - Martensitic series
MATERIAL SPECIFICATIONS - BS EN 10083-3 (2005)
CHEMICAL COMPOSITION (Mass weight - %)
C (％): ≤ 0.06
Si (％): ≤ 0.70
Mn (％): ≤ 1.50
P (％)≤: 0.040
S (％)≤: 0.030
Cr (％): 15.0 ~ 17.0
Ni (％): 4.00 ~ 6.00
Si (％): ≤ 0.70
Mn (％): ≤ 1.50
P (％)≤: 0.040
S (％)≤: 0.030
Cr (％): 15.0 ~ 17.0
Ni (％): 4.00 ~ 6.00
Mo (％): 0.80 ~ 1.50
N (％): ≥ 0.020
MECHANICAL PROPERTY & INTERGRANULAR CORROSION RESISTANT TENDENCY
Thickness/≤mm: -
Condition of thermal treatment: annealed
Hardness HBS: 320
Yield strength σ0.2≥/MPa: -
Tensile strength σb/MPa: 1100
Elongation δ( longitudinal )≥(％): -
Elongation δ(transversal )≥(％): -
Impact absorbing power Akv≥/J| longitudinal: —
Impact absorbing power Akv≥/J| transversal : —
Condition of thermal treatment: annealed
Hardness HBS: 320
Yield strength σ0.2≥/MPa: -
Tensile strength σb/MPa: 1100
Elongation δ( longitudinal )≥(％): -
Elongation δ(transversal )≥(％): -
Impact absorbing power Akv≥/J| longitudinal: —
Impact absorbing power Akv≥/J| transversal : —
Thickness/≤mm: 60
Condition of thermal treatment: QT760
Hardness HBS: -
Yield strength σ0.2≥/MPa: 550
Tensile strength σb/MPa: 760~960
Elongation δ( longitudinal )≥(％): 16
Elongation δ(transversal )≥(％): -
Impact absorbing power Akv≥/J| longitudinal: 90
Condition of thermal treatment: QT760
Hardness HBS: -
Yield strength σ0.2≥/MPa: 550
Tensile strength σb/MPa: 760~960
Elongation δ( longitudinal )≥(％): 16
Elongation δ(transversal )≥(％): -
Impact absorbing power Akv≥/J| longitudinal: 90
Impact absorbing power Akv≥/J| transversal: -
Thickness/≤mm: 60<d≤250
Condition of thermal treatment: QT650
Hardness HBS: -
Yield strength σ0.2≥/MPa: 550
Tensile strength σb/MPa: 760~960
Elongation δ( longitudinal )≥(％): -
Elongation δ(transversal )≥(％): 14
Impact absorbing power Akv≥/J| longitudinal: -
Condition of thermal treatment: QT650
Hardness HBS: -
Yield strength σ0.2≥/MPa: 550
Tensile strength σb/MPa: 760~960
Elongation δ( longitudinal )≥(％): -
Elongation δ(transversal )≥(％): 14
Impact absorbing power Akv≥/J| longitudinal: -
Impact absorbing power Akv≥/J| transversal: 70
Thickness/≤mm: ≤160
Condition of thermal treatment: QT900
Hardness HBS: -
Yield strength σ0.2≥/MPa: 700
Tensile strength σb/MPa: 900~1100
Elongation δ( longitudinal )≥(％): 16
Elongation δ(transversal )≥(％): -
Impact absorbing power Akv≥/J| longitudinal: 80
Condition of thermal treatment: QT900
Hardness HBS: -
Yield strength σ0.2≥/MPa: 700
Tensile strength σb/MPa: 900~1100
Elongation δ( longitudinal )≥(％): 16
Elongation δ(transversal )≥(％): -
Impact absorbing power Akv≥/J| longitudinal: 80
Impact absorbing power Akv≥/J| transversal: -
Thickness/≤mm: 160<d≤250
Condition of thermal treatment: QT900
Hardness HBS: -
Yield strength σ0.2≥/MPa: 700
Tensile strength σb/MPa: 900~1100
Elongation δ( longitudinal )≥(％): 14
Elongation δ(transversal )≥(％): -
Impact absorbing power Akv≥/J| longitudinal: 60
Condition of thermal treatment: QT900
Hardness HBS: -
Yield strength σ0.2≥/MPa: 700
Tensile strength σb/MPa: 900~1100
Elongation δ( longitudinal )≥(％): 14
Elongation δ(transversal )≥(％): -
Impact absorbing power Akv≥/J| longitudinal: 60
Impact absorbing power Akv≥/J| transversal: -
High strength, lower plasticity and weldability. Based on higher carbon content, martensitic steels possess higher strength, hardness, abrasive resistance, but its corrosion resistance is not so good, those steels are for mechanical parts with higher mechanical property and normal corrosion resistance. Such as mechanical spring, blades of steam turbines, hydraulic press valves. Those steels are used after quenching and tempering and annealing after forging, impacting as well.
PRODUCE FORMS & DIMENSIONS
Round bar / Wire rod (Diameter): 5.5mm to 450mm
Square bar / Flat bar: 3mm to 800mm
Length: Fixed length or random length or based on the customer's special requirement.
Round bar / Wire rod (Diameter): 5.5mm to 450mm
Square bar / Flat bar: 3mm to 800mm
Length: Fixed length or random length or based on the customer's special requirement.
Heavy/middle plate via hot rolled: T60 - 400mm X W50 - 1000mm X L1000 - 12000mm
Sheet steel via cold rolled: T0.5 - 6mm X W100- 1000mm X L1000 - 2000mm
Steel strip via cold rolled: T0.1 - 3mm X W5 - 200mm X L (or in coil form)
Forging piece: stepped shafts with flanks / discs /tubes /slugs /donuts /cubes /other different shapes based on OEM.
Sheet steel via cold rolled: T0.5 - 6mm X W100- 1000mm X L1000 - 2000mm
Steel strip via cold rolled: T0.1 - 3mm X W5 - 200mm X L (or in coil form)
Forging piece: stepped shafts with flanks / discs /tubes /slugs /donuts /cubes /other different shapes based on OEM.
ADVANTAGE & SUPERIOR SERVICE
17+ years Focus On Special Steel Manufacturing and processing.
Stock over 60 grades with a competitive price, along with cutting service for specific requirement.
Customizing special material is welcome.
CNC saw cutting.
Marking by stamping or printing.
Third party inspection service.
Export packing / Export documents.
Transport by Track, Sea, Courier (FedEx, UPS, DHL) and Air Cargo.
We closely cooperate with the professional inspection partners to strictly control the quality and improve the quality manage system, and guarantee the goods delivery each time. It is proved that we are worth of trusting and will be the strategic partner of the supplying chains in the special steels field.
TECHNICAL SALES ASSISTANCE
If you meet further on any technical enquiry or help, pleased to EMAIL our resident team of qualified production engineers, Email:sales@ccsteels.com
17+ years Focus On Special Steel Manufacturing and processing.
Stock over 60 grades with a competitive price, along with cutting service for specific requirement.
Customizing special material is welcome.
CNC saw cutting.
Marking by stamping or printing.
Third party inspection service.
Export packing / Export documents.
Transport by Track, Sea, Courier (FedEx, UPS, DHL) and Air Cargo.
We closely cooperate with the professional inspection partners to strictly control the quality and improve the quality manage system, and guarantee the goods delivery each time. It is proved that we are worth of trusting and will be the strategic partner of the supplying chains in the special steels field.
TECHNICAL SALES ASSISTANCE
If you meet further on any technical enquiry or help, pleased to EMAIL our resident team of qualified production engineers, Email:sales@ccsteels.com
Hot search：BS X4CrNiMo16-5-1
Previous page：EN 1.4313
Last page：1.4418 QT900
