ASTM A565 Grade 615
2025-07-18 13:49:00 Origin： Remark：0 Click：
ASTM A565 Grade 615 round bar, Inventory A565 type 615 Steel strip, flat bars ASTM A565 Grade 615 forgings - Steelmaking, ESR, Blooming, Hot forging / Hot rolling, Heat treated
OFFICIAL TEST CERTIFICATE: issued by TUV - SGS - BV
MATERIAL SPECIFICATION - AISI 615 & S41800
MATERIAL CATEGORY: High temperature martensitic high content chromium alloy steels
MATERIAL SPECIFICATIONS: ASTM A565
MELTING PROCESS - Consumable electrode remelted steel
H S CODE For Customs - 72201100 / 72202030 / 72221100
EX-STOCK & INVENTORY - Steel strip 0.7 X 200mm in coil Form
CHEMICAL COMPOSITIONS (mass weight %)
H S CODE For Customs - 72201100 / 72202030 / 72221100
EX-STOCK & INVENTORY - Steel strip 0.7 X 200mm in coil Form
CHEMICAL COMPOSITIONS (mass weight %)
Carbon, C (％): 0.15 ~ 0.20
Silicon, Si (％): ≤ 0.50
Manganese, Mn (％): ≤ 0.50
Phosphorus, P (％) ≤: 0.040
Sulfur, S (％) ≤: 0.030
Chromium, Cr (％): 12.0 ~ 14.0
Nickel, Ni (％): 1.80 ~ 2.20
Molybdenum, Mo (％): ≤ 0.50
Tungsten, W (％): 2.50 ~ 3.50
Silicon, Si (％): ≤ 0.50
Manganese, Mn (％): ≤ 0.50
Phosphorus, P (％) ≤: 0.040
Sulfur, S (％) ≤: 0.030
Chromium, Cr (％): 12.0 ~ 14.0
Nickel, Ni (％): 1.80 ~ 2.20
Molybdenum, Mo (％): ≤ 0.50
Tungsten, W (％): 2.50 ~ 3.50
MECHANICAL PROPERTIES UNDER HEAT TREATMENT
Condition of heat treatment: Annealed
Tensile strength, σb ≥ MPa: -
Yield strength, σ0.2 ≥ MPa:-
Yield strength, σ0.2 ≥ MPa:-
Elongation, δ5 ≥ (％): -
Reduction of area, ф ≥ (％): -
Hardness | HRS: ≤ 311
Reduction of area, ф ≥ (％): -
Hardness | HRS: ≤ 311
Condition of heat treatment: HT 981℃ ~ 1080℃ air or oil cooled, ≥620℃ X 2H, two times tempered
Tensile strength, σb ≥ MPa: 965
Yield strength, σ0.2 ≥ MPa: 760
Yield strength, σ0.2 ≥ MPa: 760
Elongation, δ5 ≥ (％): 15.0
Reduction of area, ф ≥ (％): 45.0
Hardness | HRS: 302 ~ 352
Reduction of area, ф ≥ (％): 45.0
Hardness | HRS: 302 ~ 352
PRODUCT DESCRIPTION
The alloy is usually produced by BEF AOD / EAF / VIM followed by electroslag refining (ESR) / VAR if necessary for special purpose. Bars and, where applicable, forgings are subjected to ultrasonic examination based on the different levels according to the buyers' requirements.
Bars are usually supplied bright in the annealed condition.
Final heat treatment - Quenched and tempered, + SRA.
The alloy is usually produced by BEF AOD / EAF / VIM followed by electroslag refining (ESR) / VAR if necessary for special purpose. Bars and, where applicable, forgings are subjected to ultrasonic examination based on the different levels according to the buyers' requirements.
Bars are usually supplied bright in the annealed condition.
Final heat treatment - Quenched and tempered, + SRA.
HEAT TREATMENT PRACTICE
Heat treatment is only suitable for specific grades of stainless steel. When heat treating a stainless the hardening temperatures, including rate of heating, cooling and soaking times will vary due to several factors such as the shape and size of each component. Other considerations during the heat treatment process include the type of furnace, quenching medium and work piece transfer facilities. Please consult with the heat treatment provider for whole guidance on heat treatment of stainless steel grades. We are delighted to help to work with you the special heat treatment based on your special requirements.
Heat treatment is only suitable for specific grades of stainless steel. When heat treating a stainless the hardening temperatures, including rate of heating, cooling and soaking times will vary due to several factors such as the shape and size of each component. Other considerations during the heat treatment process include the type of furnace, quenching medium and work piece transfer facilities. Please consult with the heat treatment provider for whole guidance on heat treatment of stainless steel grades. We are delighted to help to work with you the special heat treatment based on your special requirements.
PRODUCT SHAPES & DIMENSIONS
Rod / round bar / disc (diameter): 5.5 to 900mm
Square bar / flat bar: 10 to 800mm
Length: random length or based on the customer's special requirement.
Rod / round bar / disc (diameter): 5.5 to 900mm
Square bar / flat bar: 10 to 800mm
Length: random length or based on the customer's special requirement.
Heavy / middle plate via hot rolled: T60 - 400 X W100 - 1200 X L1000 - 4000mm
Sheet steel via cold rolled: T0.5 - 6 X W100- 1000 X L1000 - 2000mm
Steel strip via cold rolled coil: T0.5 - 3 X W5 - 200 X L (or in coil form)
Forging piece: stepped shafts, and other different shapes based on OEM.
TYPICAL APPLICATIONSSheet steel via cold rolled: T0.5 - 6 X W100- 1000 X L1000 - 2000mm
Steel strip via cold rolled coil: T0.5 - 3 X W5 - 200 X L (or in coil form)
Forging piece: stepped shafts, and other different shapes based on OEM.
Chemical equipment.
Mechanical parts used in the condition of corrosion resistance.
Automobile parts, exhaust pipe.
Electronics, Turbine motor blade.
Bolt and nut, valve and pressure vessel.
TECHNICAL SALES ASSISTANCE & SERVICE
Stock over 60 grades with a competitive price, along with cutting service for specific requirement.
Customizing special material is welcome.
CNC saw cutting.
Marking by stamping or printing.
Third party inspection service.
Export packing / Export documents.
Transport by Track, Sea, Courier (FedEx, UPS, DHL) and Air Cargo.
Stock over 60 grades with a competitive price, along with cutting service for specific requirement.
Customizing special material is welcome.
CNC saw cutting.
Marking by stamping or printing.
Third party inspection service.
Export packing / Export documents.
Transport by Track, Sea, Courier (FedEx, UPS, DHL) and Air Cargo.
If you meet further on any technical enquiry, pleased to EMAIL our resident team of qualified production engineers. E-mail: sales@ccsteels.com
Hot search：ASTM A565 Grade 615
Previous page：EN 1.4821
Last page：BS X15CrNiSi25-21
Total list
Monthly rank
- 76ASTM A565 type 616HT
- 29N06102
- 27Z15CN17-03
- 21Z10CNT18-11
- 20X11CrMo12-1
- 18EN 57
- 18X35CrMo17
- 1710705BU
- 16X66Cr13
- 14X2Cr11 / 1.4003