AISI 303Cu Stockist, AISI 303Cu Equivalent Steel

AISI 303Cu
2014-09-20 08:07:31   Origin:   Remark:0 Click:

Description 303Cu datasheet, 303Cu Chemical, 303Cu Properties from Steelmaking, Blooming, Hot forging, Hot rolling, Heat treat, Straightening, 100% Ultrasonic flaw detection test, Cold working or Machined. All of these materials conform to Military standard, nuclear power. 100% Ultrasonic test ASTM E2375 /SAE AMS 2154 /SEP 1923 /GB/T 4162 /EN 10228-3.
AUSENITIC STAINELSS - AISI 303Cu
MATERIAL CATEGORY - 18Cr-9Ni-3Cu Austenitic steel 
PRODUCT DESCRIPTION
The alloy is usually produced by AOD / VOD /VIM followed by electroslag refining (ESR) / VAR if necessary for special purpose.
Bars and, where applicable, forgings are subjected to ultrasonic examination based on the different levels according to the buyers' requirements.
Bars are usually supplied black/bright in the softened condition.
Final heat treatment - solution treatment / QT 
MATERIAL SPECIFICATIONS - ASTM A959 (2004), A276, A312, A632, A176, A580
AVAILABILITY  
Round bar / flat bar / steel strip / square bar  
Bright - peeled + polishing, centerless grinding
Forged - ring, tube, pipe casing, discs, shaft
CHEMICAL COMPOSITION (WEIGHT %)
MECHANICAL PROPERTIES FINAL HEAT TREATMENT
Form: Plate,sheet, strip
Tensile strength, σb/MPa:  550
Yield strength, σ0.2/MPa: -
Elongation, δ (%):   -
Reduction of Area, ф (%):   -
Hardness (HBW):  -
Hardness | HRB:  -
Cold bending property: N
HEAT TREATMENT PRACTICE
Heat treatment is only suitable for specific grades of
stainless steel. When heat treating a stainless the hardening temperatures, including rate of heating, cooling and soaking times will vary due to several factors such as the shape and size of each component. Other considerations during the heat treatment process include the type of furnace, quenching medium and work piece transfer facilities. Please consult with the heat treatment provider for whole guidance on heat treatment of stainless steel grades. We are delighted to help to work with you the special heat treatment based on your special requirements. 
TYPICAL APPLICATIONS 
Chemical equipment
Mechanical parts used in the condition of corrosion resistance 
Bolt and nut
Pressure vessel
TECHNICAL SALES ASSISTANCE  
If you meet further on any technical enquiry. pleased to EMAIL us or call our resident team of qualified production engineers, Email: sales@ccsteels.com
PROFILE AND DIMENSIONS
Round bar / Wire rod (Diameter): 5.5mm to 550mm
Square bar / Flat bar: 3mm to 1000mm
Plate / Sheet steel / Steel strip: 0.1mm to 1000mm
Width: 8mm to 1000mm
Length: random length or based on the customer's special requirement.
Forged steel shape: stepped shafts with flanks / discs /tubes /slugs /donuts /cubes /other different shapes based on OEM.
   

Hot search:AISI 303Cu

Previous page:UNS S30323
Last page:S30330

Share to: