AISI 315
2016-05-16 13:53:35 Origin： Remark：0 Click：
Material specification AISI 315 datasheet, AISI 315 Chemical, AISI 315 Ring forging, Wire rod, sheet - steelmaking, ESR,Blooming, Forging, Rolling, Heat treatment, Straightened, Ultrasonic test, Cold working, Machined. Material standards - ASTM A276. We also possess advanced precision machining equipments for further processing.
TECHNICAL SPECIFICATION / DATASHEET - AISI 315
OFFICIAL TEST CERTIFICATE: issued by TUV - SGS - BV
MATERIAL CATEGORY: austenitic stainless steel
Technical standards: ASTM A276
CHEMICAL COMPOSITION (WEIGHT %)
C (％): ≤0.15
Si (％): ≤1.00
Mn (％): ≤2.00
P (％)≤: 0.045
S (％)≤: 0.030
Cr (％): 17.0～19.0
Ni (％): 7.00～9.50
Mo (％): 1.00～1.50
Other (％): C u1.00～1.50
Si (％): ≤1.00
Mn (％): ≤2.00
P (％)≤: 0.045
S (％)≤: 0.030
Cr (％): 17.0～19.0
Ni (％): 7.00～9.50
Mo (％): 1.00～1.50
Other (％): C u1.00～1.50
MECHANICAL PROPERTIES
σb/≥ MPa: 515
σ0.2/≥ MPa: 205
δ ≥(％): 40
δ ≥(％): 40
ф ≥ (％): 50
Hardness | HR B: 217 Max.
APPLICATION FIELD
Tall oil distillation columns and equipments
Food processing equipments
Hydrometallurgy, heat exchangers
Oil and gas production equipments
Pulp mill bleach systems
Seawater handling equipments
PRODUCT DESCRIPTION
The alloy is usually produced by AOD / VOD /VIM followed by electroslag refining (ESR) / VAR if necessary for special purpose.
Bars and, where applicable, forgings are subjected to ultrasonic examination based on the different levels according to the buyers' requirements.
Bars are usually supplied black/bright in the annealed condition.
Final heat treatment - solution treatment
The alloy is usually produced by AOD / VOD /VIM followed by electroslag refining (ESR) / VAR if necessary for special purpose.
Bars and, where applicable, forgings are subjected to ultrasonic examination based on the different levels according to the buyers' requirements.
Bars are usually supplied black/bright in the annealed condition.
Final heat treatment - solution treatment
Heavy/middle plate via hot rolled: T6 - 200mm X W1000- 2500mm X L1000-12000mm
Sheet steel via cold rolled: T0.5 - 6mm X W600- 1000mm X L1000 - 2000mm
Steel strip via cold rolled: T0.1 - 3mm X W5 - 200mm X L (or in coil form)
Forging piece: stepped shafts with flanks / discs /tubes /slugs /donuts /cubes /other different shapes based on OEM.
Pipes / Tubings: OD 3-219 mm, with wall thickness ranging from 0.50 to 35 mm.
Sheet steel via cold rolled: T0.5 - 6mm X W600- 1000mm X L1000 - 2000mm
Steel strip via cold rolled: T0.1 - 3mm X W5 - 200mm X L (or in coil form)
Forging piece: stepped shafts with flanks / discs /tubes /slugs /donuts /cubes /other different shapes based on OEM.
Pipes / Tubings: OD 3-219 mm, with wall thickness ranging from 0.50 to 35 mm.
TECHNICAL SALES ASSISTANCE
If you meet further on any technical enquiry. pleased to EMAIL our resident team of qualified production engineers.
If you meet further on any technical enquiry. pleased to EMAIL our resident team of qualified production engineers.
Previous page：AISI/SAE 8145
Last page：SUS316F
