Z12CNDV12-3
2026-06-09 16:30:00 Origin： Remark：0 Click：
Stock available martensitic steel Z12CNDV12 peeled round bar, plate, Z12CNDV12 steelmaking, ESR melted, Hot forged / rolled, heat treated, milled
TECHNICAL DATA SHEET - Z12CNDV12-3
Technical specifications: DGA - AIR 9160/C - 1973
Official test report: issued by TUV - SGS
Inventory on stock: round bar 55 ~ 210 mm
Typical chemical compositions (mass fraction %)
Carbon, C (％): 0.08 ~ 0.15
Silicon, Si (％): ≤ 0.35
Manganese, Mn (％): 0.50 ~ 0.90
Phosphorus, P (％): ≤ 0.035
Sulfur, S (％): ≤ 0.025
Carbon, C (％): 0.08 ~ 0.15
Silicon, Si (％): ≤ 0.35
Manganese, Mn (％): 0.50 ~ 0.90
Phosphorus, P (％): ≤ 0.035
Sulfur, S (％): ≤ 0.025
Chromium, Cr (%): 11.0 ~ 12.5
Molybdenum, Mo (%): 1.50 ~ 2.00
Nickel, Ni (%): 2.00 ~ 3.00
Vanadium, V (%): 0.25 ~ 0.40
Nitrogen, N (%): 0.01 ~ 0.05.
MECHANICAL PROPERTIES UNDER ROOM TEMPERATURE
Tensile strength, Rm ≥ MPa: 930 ~ 1140
Yield strength, Rp0.2 ≥ MPa: 780
Elongation, A5 ≥ (％): 14.0
Reduction of area, Z ≥ (％): 40.0
Impact, AKv (J/cm2): -
Annealed hardness | HB: 286 min.
Quenching, 1030,+/-10 Deg, tempering 565, +/-5 Deg.
PROFILES & DIMENSIONS
Round bar & disc (diameter): 6.0 ~ 900 mm
Square bar / flat bar: 10 ~ 500 mm
Steel strip: T0.70 ~ 3 X W10 ~ 200 X Coil
Forging piece: stepped shafts, other different shapes based on OEM.
Round bar & disc (diameter): 6.0 ~ 900 mm
Square bar / flat bar: 10 ~ 500 mm
Steel strip: T0.70 ~ 3 X W10 ~ 200 X Coil
Forging piece: stepped shafts, other different shapes based on OEM.
TECHNICAL SALES ASSISTANCE
If you meet further on any technical enquiry, pleased to EMAIL (sales@ccsteels.com) our resident team of qualified production engineers.
If you meet further on any technical enquiry, pleased to EMAIL (sales@ccsteels.com) our resident team of qualified production engineers.
Total list
Monthly rank
- 19Z15CN24-13
- 17ASTM A538 / AMS 6514
- 16ASTM 301
- 16ASTM A1021 Grade F
- 15X1CrNiMoCu12-5-2
- 15STS321
- 15S41425
- 14ASTM A565 Grade 616
- 14BS S126
- 141.6359